Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 1194

M5300, M6100, and M7100 Series ProSAFE Managed Switches Term Definition Intf Interface on which PoE is configured. Class Class of the powered device according to the IEEE802.3af and IEEE802.3at definition. Class Usage Max Power (watts) • 0 Default 0.44-12.95 • 1 Optional 0.44-3.84 • 2 Optional 3.84-6.49 • 3 Optional 6.49-12.95 • 4 Optional 12.95-25.5 Power The power supplied to the powered device (in watts). Output Current The current supplied to the powered device (in mA). (mA) Output Voltage The voltage supplied to the powered device (in volts). (volts) Status The Status field reports the state of power supplied to the port. The possible values are: • Disabled-The PoE function is disabled on this port. • Searching-The port is detecting the PoE device. • Delivering Power-The port is providing power to the PoE device. • Fault-The POE device is not IEEE compliant; no power is provided. • Test-The port is in testing state. • Other Fault-The port has experienced problems other than compliance issues. When a port begins to deliver power, there is a trap indicating so. When a port stops delivering power, there is a trap indicating so. Command example: (NETGEAR Switch) #show poe port info all High Intf Power 0/1 Yes Max Output Power Class Power Current (W) (W) (mA) 32.0 Unknown 00.000 0 Output Voltage (volt) ------- 00.00 Status Fault Status Searching No Error Command example: (NETGEAR Switch) #show poe port info 0/33 Intf High Power 0/33 No Max Power (W) ----18.0 Class ------2 Power (W) -----04.400 Output Current (mA) ------- 84 Output Voltage (volt) ------53.3 Status Delivering Power Fault Status -------No Error Power over Ethernet Commands 1194