Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 1071
no mac access-group, available, depending on the platform.
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1071 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches Note: The keyword control-plane is only available in Global Config mode. Note: You should be aware that the out option may or may not be available, depending on the platform. Format Modes mac access-group name {{control-plane | in | out} vlan vlan-id {in | out}} [sequence 1-4294967295] Global Config Interface Config Parameter name vlan-id sequence Description The name of the Access Control List. A VLAN ID associated with a specific IP ACL in a given direction. A optional sequence number that indicates the order of this IP access list relative to the other IP access lists already assigned to this interface and direction. The range is 1 to 4294967295. Command example: (NETGEAR Switch)(Config)#mac access-group mac1 control-plane no mac access-group This command removes a MAC ACL identified by name from the interface in a given direction. Format Modes no mac access-group name {{control-plane | in | out} vlan vlan-id {in | out}} Global Config Interface Config Command example: (NETGEAR Switch)(Config)#no mac access-group mac1 control-plane Quality of Service Commands 1071