Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 516
DHCP L2 Relay Agent Commands
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 516 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches Format Mode show mac-address-table static {macaddr vlanid | all} Privileged EXEC Term MAC Address VLAN ID Source Ports Definition The MAC Address of the static MAC filter entry. The VLAN ID of the static MAC filter entry. The source port filter set slot and ports. Note: Only multicast address filters can have destination port lists. show mac-address-table staticfiltering This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table. Format Mode show mac-address-table staticfiltering Privileged EXEC Term VLAN ID MAC Address Type Description Interfaces Definition The VLAN in which the MAC Address is learned. A unicast MAC address for which the switch has forwarding and or filtering information. As the data is gleaned from the MFDB, the address will be a multicast address. The format is 6 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are added to the table as a result of a learning process or protocol. The text description of this multicast table entry. The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:). DHCP L2 Relay Agent Commands You can enable the switch to operate as a DHCP Layer 2 relay agent to relay DHCP requests from clients to a Layer 3 relay agent or server. The Circuit ID and Remote ID can be added to DHCP requests relayed from clients to a DHCP server. This information is included in DHCP Option 82, as specified in sections 3.1 and 3.2 of RFC3046. Switching Commands 516