Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 1159
ipv6 pim bsr-border, ipv6 pim bsr-candidate, no ipv6 pim hello-interval
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1159 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches no ipv6 pim hello-interval Use this command to set the PIM hello interval to the default value. Format Mode no ipv6 pim hello-interval Interface Config ipv6 pim bsr-border Use this command to prevent bootstrap router (BSR) messages from being sent or received on the specified interface. Note: This command takes effect only when PIM-SM is enabled in the Global mode. Default Format Mode disabled ipv6 pim bsr-border Interface Config Command example: (NETGEAR) (Interface 1/0/1) #ipv6 pim bsr-border no ipv6 pim bsr-border Use this command to disable the setting of BSR border on the specified interface. Format Mode no ipv6 pim bsr-border Interface Config ipv6 pim bsr-candidate This command is used to configure the router to announce its candidacy as a bootstrap router (BSR). The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. Note: This command takes effect only when PIM-SM is configured as the PIM mode. IPv6 Multicast Commands 1159