Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 627
show lldp tlv-select, show lldp dcbx interface, no lldp dcbx port-role
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 627 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches no lldp dcbx port-role Use the no lldp dcbx port-role command in Interface Configuration mode to configure the port role to manual. Format Mode no lldp dcbx port-role Interface Config show lldp tlv-select Use the show lldp tlv-select command in Privileged EXEC mode to display the per interface TLV configuration. Format Mode show lldp tlv-select {interface all | unit/slot/port} Privileged EXEC Parameter all unit/slot/port Description All interfaces. A valid physical interface specifier. Command example: The following command shows the TLVs selected for transmission on multiple interfaces: switch(config)# show lldp tlv-select interface all Interface ETS Config ETS Recommend PFC App Priority QCN te1/0/1 Yes No Yes No Yes te1/0/2 No No Yes No Yes show lldp dcbx interface Use the show lldp dcbx interface command in Privileged EXEC mode to display the local DCBX control status of an interface. Format Mode show lldp dcbx {interface all | unit/slot/port} [detail] Privileged EXEC Parameter unit/slot/port all Detail Description A valid physical interface specifier. All interfaces. Display detailed DCBX information. Data Center Commands 627