Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 698

M5300, M6100, and M7100 Series ProSAFE Managed Switches Parameter community-list exact-match Description The name of a standard community list. Up to eight names can be included in a single match term. (Optional) When this option is given, a route is only considered a match if the set of communities on the route is an exact match for the set of communities in one of the statements in the community list. no match community To delete a match term from a route map, use the no match community command. The command no match community list exact-match removes the match statement from the route map. (It does not simply remove the exact-match option.) The command no match community removes the match term and all its community lists. Format Mode no match community community-list [community-list...] [exact-match] Route Map Configuration match ip address To configure a route map to match based on a destination prefix, use the match ip address command in Route Map Configuration mode. If you specify multiple prefix lists in one statement, then a match occurs if a prefix matches any one of the prefix lists. If you configure a match IP address statement within a route map section that already has a match IP address statement, the new prefix lists are added to the existing set of prefix lists, and a match occurs if any prefix list in the combined set matches the prefix. Default Format Mode No match criteria are defined by default. match ip address prefix-list prefix-list-name [prefix-list-name...] Route Map Configuration Parameter prefix-list-name Description The name of a prefix list used to identify the set of matching routes. Up to eight prefix lists can be specified. no match ip address (for a prefix list) To delete a match statement for a prefix list from a route map, use the no match ip address command. Format Mode no match ip address prefix-list prefix-list-name [prefix-list-name...] Route Map Configuration Routing Commands 698