Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 1032
show ipv6 verify source, show ipv6 source binding
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1032 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches show ipv6 verify source Use this command to display the IPv6SG configurations on all ports. If the interface option is specified, the output is restricted to the specified unit/slot/port argument. Format Mode show ipv6 verify source [interface unit/slot/port] Privileged EXEC User EXEC Term Interface Filter Type IPv6 Address MAC Address VLAN Definition Interface address in unit/slot/port format. Is one of two values: • ip-v6mac: User has configured MAC address filtering on this interface. • ipv6: Only IPv6 address filtering on this interface. IPv6 address of the interface If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port security is disabled on the interface, then the MAC Address field displays permit-all. The VLAN for the binding rule. Command example: (NETGEAR Switch) #show ipv6 verify source Interface --------- 0/1 0/1 Filter Type ----------- ipv6-mac ipv6-mac IP Address 2000::1/64 3000::1/64 MAC Address 00:02:B3:06:60:80 00:0F:FE:00:13:04 Vlan ----- 10 10 show ipv6 source binding Use this command to display the IPv6SG bindings. Format Mode show ipv6 source binding [dhcp-snooping | static] [interface unit/slot/port] [vlan-id] Privileged EXEC User EXEC Term MAC Address IP Address Type Definition The MAC address for the entry that is added. The IP address of the entry that is added. Entry type; statically configured from CLI or dynamically learned from DHCP Snooping. IPv6 Commands 1032