Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 1011
ipv6 dhcp client pd, ipv6 dhcp server, rapid-commit, automatic
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1011 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches ipv6 dhcp client pd Use this command to enable the Dynamic Host Configuration Protocol (DHCP) for IPv6 client process (if the process is not currently running) and to enable requests for prefix delegation through a specified interface. When prefix delegation is enabled and a prefix is successfully acquired, the prefix is stored in the IPv6 general prefix pool with an internal name defined by the automatic argument. Note: The Prefix Delegation client is supported on only one IP interface. rapid-commit enables the use of a two-message exchange method for prefix delegation and other configuration. If enabled, the client includes the rapid commit option in a solicit message. The DHCP for IPv6 client, server, and relay functions are mutually exclusive on an interface. If one of these functions is already enabled and a user tries to configure a different function on the same interface, a message is displayed. Default Format Mode Prefix delegation is disabled on an interface. ipv6 dhcp client pd [rapid-commit] Interface Config Command example: The following examples enable prefix delegation on interface 1/0/1: (NETGEAR Switch) #configure (NETGEAR Switch) (Config)#interface 1/0/1 (NETGEAR Switch) (Interface 1/0/1)# ipv6 dhcp client pd (NETGEAR Switch) #configure (NETGEAR Switch) (Config)#interface 1/0/1 (NETGEAR Switch) (Interface 1/0/1)# ipv6 dhcp client pd rapid-commit no ipv6 dhcp client pd This command disables requests for prefix delegation. Format Mode no ipv6 dhcp client pd Interface Config ipv6 dhcp server Use this command to configure DHCPv6 server functionality on an interface or range of interfaces. The pool-name is the DHCPv6 pool containing stateless and/or prefix delegation parameters, automatic enables the server to automatically determine which pool to use when allocating addresses for a client, rapid-commit is an option that allows for an IPv6 Commands 1011