Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 458
dot1x supplicant timeout auth-period, dot1x supplicant user, show dot1x statistics
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 458 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches no dot1x supplicant timeout held-period This command sets the held-period value to the default value. Format Mode no dot1x supplicant timeout held-period Interface Config dot1x supplicant timeout auth-period This command configures the authentication period timer interval to wait for the next EAP request challenge from the authenticator. The interval can be in a range from 1-65535 seconds. The default is 30 seconds. Default Format Mode 30 seconds dot1x supplicant timeout auth-period seconds Interface Config no dot1x supplicant timeout auth-period This command sets the auth-period value to the default value. Format Mode no dot1x supplicant timeout auth-period Interface Config dot1x supplicant user Use this command to map the given user to the port. Format Mode dot1x supplicant user Interface Config show dot1x statistics This command displays the dot1x port statistics in detail. Format Mode show dot1x statistics unit/slot/port Privileged EXEC User EXEC Term EAPOL Frames Received EAPOL Frames Transmitted Definition Displays the number of valid EAPOL frames received on the port. Displays the number of EAPOL frames transmitted via the port. Switching Commands 458