Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 533

M5300, M6100, and M7100 Series ProSAFE Managed Switches clear ip dhcp snooping binding Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific interface. Format Mode clear ip dhcp snooping binding [interface unit/slot/port] Privileged EXEC User EXEC clear ip dhcp snooping statistics Use this command to clear all DHCP Snooping statistics. Format Mode clear ip dhcp snooping statistics Privileged EXEC User EXEC show ip verify source Use this command to display the IPSG configurations on all ports. Format Mode show ip verify source Privileged EXEC User EXEC Term Interface Filter Type IP Address MAC Address VLAN Definition Interface address in unit/slot/port format. Is one of two values: ip-mac: User has configured MAC address filtering on this interface. ip: Only IP address filtering on this interface. IP address of the interface If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port security is disabled on the interface, then the MAC Address field displays "permit-all." The VLAN for the binding rule. Command example: (NETGEAR Switch) #show ip verify source Interface --------- 0/1 0/1 Filter Type ----------- ip-mac ip-mac IP Address 210.1.1.3 210.1.1.4 MAC Address 00:02:B3:06:60:80 00:0F:FE:00:13:04 Vlan ----- 10 10 Switching Commands 533