HP ZBook Studio x360 Maintenance and Service Guide - Page 68
Discrete graphics models, UMA graphics models, CAUTION
View all HP ZBook Studio x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3. Remove the fan/heat sink assembly (4). CAUTION: When lifting the heat sink out of the computer, be careful not to bend the arms that connect the fans. Discrete graphics models: UMA graphics models: Various thermal pads are used on the system board components and the heat sink sections and that service them. See the following images for thermal pad locations. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board components each time the fan/heat sink assembly is removed. Replacement thermal material is included with the thermal module and system board spare part kits. 56 Chapter 5 Removal and replacement procedures for authorized service provider parts
3.
Remove the fan/heat sink assembly
(4)
.
CAUTION:
When lifting the heat sink out of the computer, be careful not to bend the arms that connect
the fans.
Discrete graphics models:
UMA graphics models:
Various thermal pads are used on the system board components and the heat sink sections and that service
them. See the following images for thermal pad locations.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly
and the system board components each time the fan/heat sink assembly is removed. Replacement thermal
material is included with the thermal module and system board spare part kits.
56
Chapter 5
Removal and replacement procedures for authorized service provider parts