HP ZBook Studio x360 Maintenance and Service Guide - Page 67
Thermal module, Disconnect the cable for each fan from the system board
View all HP ZBook Studio x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Thermal module NOTE: The thermal module spare part kit includes replacement thermal material. Description Thermal module for use only with models with discrete graphics memory Thermal module for use only with models with UMA graphics memory Spare part number L28670-001 L30973-001 Before removing the thermal module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the thermal module: 1. Disconnect the cable for each fan from the system board (1). 2. Remove the two Phillips M2.0×4.0 screws from each fan (2) and the six captive screws (discrete models) or four captive screws (UMA models) in the middle of the heat sink (between the fans) in the order indicated on the heat sink (3). Component replacement procedures 55