HP ZBook Studio x360 Maintenance and Service Guide - Page 62
NFC module, and the NFC antenna cable
View all HP ZBook Studio x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
NFC module Description NFC module NFC module cable Spare part number L33682-001 L28668-001 (Cable Kit) Before removing the NFC module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the NFC module: 1. Disconnect the system board cable (1) and the NFC antenna cable (2) from the ZIF connectors on the NFC module. 2. Use a plastic non-conductive tool to release the NFC module from the adhesive securing it to the computer (3), and then remove the module from the computer. Reverse the removal procedures to install the NFC module. 50 Chapter 5 Removal and replacement procedures for authorized service provider parts