HP ZBook Studio x360 Maintenance and Service Guide - Page 52
Solid-state drive (2.5 inch), Remove the battery see
View all HP ZBook Studio x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Solid-state drive (2.5 inch) NOTE: 2.5-inch solid-state drives are only available on models with a 4-cell battery. Description 1 TB, SATA, TLC, 2.5-inch 256 GB, SATA, TLC, 2.5-inch Drive bracket, touch and non-touch models Spare part number L28686-001 L28687-001 L28674-001 (Bracket Kit) L33681-001 (Hard Drive Hardware Kit) Before removing the solid-state drive, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the solid-state drive: 1. Remove the four Phillips M2.0×2.0 screws (1) that secure the drive assembly to the computer. 2. Slide the drive away from the connector (2), and then lift the drive out of the computer (3). 40 Chapter 5 Removal and replacement procedures for authorized service provider parts