HP ZBook Studio x360 Maintenance and Service Guide - Page 47
Solid-state drive (M.2), Remove the Phillips M2.0×3.0 screw
View all HP ZBook Studio x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Solid-state drive (M.2) Description 2-TB, TLC 1-TB, TLC 1-TB, MLC 512-GB, TLC 512-GB, self-encrypting drive (SED), OPAL 2, TLC 512-GB, FIPS, TLC 256-GB, TLC 256-GB, PCIe, self-encrypting drive (SED), OPAL 2 256-GB, SATA-3, self-encrypting drive (SED), OPAL 2 Optane memory module, 16-GB Spare part number L28681-001 L28677-001 L28685-001 L28683-001 L28682-001 L28684-001 L28679-001 L28678-001 L28680-001 L28676-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the solid-state drive: 1. Lift the Mylar from atop the solid-state drive. 2. Remove the Phillips M2.0×3.0 screw (1) that secures the solid-state drive to the system board. Component replacement procedures 35