Pioneer CDJ-800MK2 Owner's Manual - Page 38
Affichage de messages d, erreur, Error message display
UPC - 012562792071
View all Pioneer CDJ-800MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Troubleshooting (Error message display)/Guide de dépannage (Affichage de messages d'erreur) Error message display When the unit is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against the following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer Service Station or contact the store from which you purchased your player for assistance. Error code Error type Error content Cause and remedy E-72 01 TOC READ ERROR Can't read TOC data. Disc is cracked. = Replace disc. E-83 01 E-83 02 E-83 03 PLAYER ERROR Can't play this disc properly. Disc is dirty. = Clean disc. If other discs operate normally, problem is with this disc. E-83 04 E-83 05 MP3 DECODER ERROR DATA FORMAT ERROR Can't play this disc properly. Does not conform to MP3 format. = Change to disc conforming to MP3 format. E-91 01 MECHANICAL TIME OUT Mechanical operation did not end within Foreign object in disc loading slot. specified time. = Remove foreign object. Affichage de messages d'erreur Lorsque l'appareil ne parvient pas à fonctionner correctement, un code d'erreur apparaît sur le panneau d'affichage. Vérifiez ce code sur le tableau suivant et prenez les mesures recommandées pour porter remède à la difficulté. Si un code d'erreur différent de ceux qui sont indiqués ici est affiché, ou si le même code réapparaît après la correction, contactez le Centre de service agréé Pioneer le plus proche ou contactez le magasin où vous avez acheté votre lecteur. Code d'erreur Type d'erreur Sens de l'erreur Cause et correction E-72 01 TOC READ ERROR La lecture de la table des matières (TOC) Le disque est fissuré est impossible. = Remplacez le disque. E-83 01 E-83 02 E-83 03 PLAYER ERROR Le disque installé ne peut pas être lu correctement. Le disque est souillé. = Nettoyez le disque. Si d'autres disques fonctionnent normalement, le problème provient de ce disque particulier. E-83 04 E-83 05 MP3 DECODER ERROR DATA FORMAT ERROR Le disque installé ne peut pas être lu Le disque n'est pas conforme au format MP3. correctement. = Utilisez un disque conforme au format MP3. E-91 01 MECHANICAL TIME OUT Le fonctionnement mécanique ne s'arrête pas dans la durée spécifiée. Présence d'un corps étranger dans la fente de chargement du disque. = Enlevez le corps étranger. 38 En/Fr Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. Publication de Pioneer Corporation. © 2005 Pioneer Corporation. Tous droits de reproduction et de traduction réservés.