Xerox C2424 Service Manual - Page 247
Copied Image Colors Do Not Match the Original - toner
UPC - 095205676532
View all Xerox C2424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Copied Image Colors Do Not Match the Original Note There can be slight color variations from an original copy to a solid ink print resulting from the physical properties of the original, (i.e., ink jet copy, laser toner copy, etc.) Step Questions and Actions Yes 1 1. Print the Graphics Demo page from the system control panel. 2. Make a copy of the Graphics Demo page. 3. Compare the copy to the original. 4. Do the colors vary from the original? Go to Step 2. 2 1. Ensure supported media is being used. Complete. 2. Check and/or adjust the control panel copy settings. NOTE: Print the Troubleshooting Print Quality information page from the control panel and review Output Quality and Color Settings section to aid in adjusting copy settings. 1. Does adjusting the copy settings correct the problem? 3 1. Perform the "Manual DADF to Scanner Calibration" on page 6-9. 2. Did this correct the problem? Complete. 4 1. Replace the document feeder. 2. Did this correct the problem? Complete. 5 1. Inspect the cable connection between the Replace the scanner assembly and the print engine. scanner 2. Is there any visible damage or defects in the assembly. cabling, (i.e. bent or broken pins, etc.)? No Complete. Go to Step 3. Go to Step 4. Go to Step 5. Replace in the following order: ■ Electronics module. ■ Scanner assembly. Image-Quality Troubleshooting 5-7