Xerox C2424 Service Manual - Page 188

Paper Trail Edge Times (Continued) Paper is picked and moved through either the simplex or duplex paper path to determine the paper trailing edge arrival time at each paper path sensor. R values have alternate definitions or are unused depending on the pick tray and if simplex or duplex path was selected. R# Definition Typical Value Actions 3 Unused Tray 1 Pick 2 Unused 3 Unused Common 4 Deskew Trailing Edge Interval (us) MFG Only MFG Only MFG Only MFG Only 5 Preheat Trailing Edge Interval (us) MFG Only 6 Strip Trailing Edge MFG Interval (us) Only Simplex Path 7 Exit Trailing Edge Interval (us) MFG Only Reports the interval from the time the engine software is commanded to start the transfix process until the deskew sensor deactivates. (part way through the paper transfix motion). Reports the interval from the time the engine software is commanded to start the transfix process until the preheat sensor deactivates. (part way through the paper transfix motion). Reports the interval from the time the engine software is commanded to start the exit process until the strip sensor deactivates. (part way through the paper exit motion). Reports the interval from the time the engine software is commanded to start the duplex pick process until the Exit sensor deactivates. Paper Sensor Bounce Times Paper is picked and moved through either the simplex paper path to determine the paper trailing edge bounce interval at each paper path sensor. R values have alternate definitions or are unused depending on the pick tray and if simplex or duplex path was selected. R# Definition Typical Value Actions Common 0 Tray MFG Only Reports the tray from which the paper was picked. 4-30 WorkCentre C2424 Service Manual