Xerox C2424 Service Manual - Page 185

Check Paper Path Menu Paper Drive Power Test picks paper from selected tray (test currently supports picking from Tray 2 only) and moves it through either the simplex or duplex paper path to determine paper path power requirements. R# Definition Typical Value Actions 0 Tray MFG Only 1 Paper Size MFG Only 2 Unused MFG Only 3 Unused MFG Only 4 Tray 2 Pick Average MFG Power (watts) Only Reports the tray from which the test paper was picked. Reports the size of the picked paper. Reports average of the power over the pick interval (begin pick to Deskew sensor). Paper Lead Edge Times Paper is picked and moved through either simplex or duplex paper path to determine leading edge arrival time at each paper path sensor. R values have alternate definitions or are unused depending on the pick tray and if simplex or duplex path was selected. R# Definition Common 0 Tray 1 Paper Size Tray 4 Pick 2 Tray 4 Pick Interval (us) 3 Tray 4 Transport Interval (us) 4 Tray 3 Transport Interval (us) Typical Value MFG Only MFG Only MFG Only MFG Only MFG Only Actions Reports the tray from which the test paper was picked. Reports the size of the picked paper. Reports the interval from the time the engine software is commanded to start the tray 4 pick process until the Tray 4 Pick sensor activates. Reports the interval from the Tray 4 Pick sensor activation until the Tray 3 Pick sensor activates. Reports the interval from the Tray 3 Pick sensor activation until the Deskew sensor activates. General Troubleshooting 4-27