Xerox C2424 Service Manual - Page 189

Paper Sensor Bounce Times (Continued) Paper is picked and moved through either the simplex paper path to determine the paper trailing edge bounce interval at each paper path sensor. R values have alternate definitions or are unused depending on the pick tray and if simplex or duplex path was selected. R# Definition Typical Value Actions 1 Paper Size Tray 4 Pick 2 Tray 4 Pick Bounce Interval (us) MFG Only MFG Only Tray 3 Pick 3 Tray 3 Pick Bounce Interval (us) MFG Only Tray 2 Pick 2 unused 3 unused Tray 1 Pick 2 unused 3 unused Common 4 Deskew Bounce Interval (us) MFG Only MFG Only MFG Only MFG Only MFG Only 5 Preheat Bounce Interval (us) MFG Only 6 Strip Bounce Interval (us) MFG Only 7 Exit Bounce Interval MFG (us) Only Reports size of the picked paper. Reports the interval during which the Tray 4 Pick sensor bounces following the passage of the paper trailing edge. Reports the interval during which the Tray 3 pick sensor bounces following the passage of the paper trailing edge. Reports the interval during which the Deskew sensor bounces following the passage of the paper trailing edge. Reports the interval during which the Preheat sensor bounces following the passage of the paper trailing edge. Reports the interval during which the Strip sensor bounces following the passage of the paper trailing edge. Reports the interval during which the exit sensor bounces following the passage of the paper trailing edge. General Troubleshooting 4-31