2004 Ducati Monster S4R Owners Manual - Page 130
2004 Ducati Monster S4R Manual
Page 130 highlights
Turn indicators (fig. 58) Remove the screw (1) and detach the glass (2) from the body. The bulb is of the bayonet-type: press and rotate anticlockwise to remove. Fit the spare bulb by pressing and turning clockwise until it clicks. Refit the glass sliding the small tab (A) into the suitable slot in the indicator body. Tighten the screw (1). A 2 E 1 fig. 58 Stop light (fig. 59) To replace the stop and parking light bulb, unscrew the two screws (1) that secure the glass (2). Remove the glass. The bulb is of the bayonet-type: press and rotate anti-clockwise to remove. Fit the spare bulb by pressing and turning clockwise until it clicks. Refit the glass. 1 2 fig. 59 55
![](/manual_guide/autos/2004-ducati-monster-s4r-owners-manual-ff92d71/130.png)
55
E
2
1
fig. 59
Turn indicators
(fig. 58)
Remove the screw (1) and detach the glass (2) from the
body.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove. Fit the spare bulb by pressing and
turning clockwise until it clicks. Refit the glass sliding the
small tab (A) into the suitable slot in the indicator body.
Tighten the screw (1).
Stop light
(fig. 59)
To replace the stop and parking light bulb, unscrew the
two screws (1) that secure the glass (2). Remove the
glass. The bulb is of the bayonet-type: press and rotate
anti-clockwise to remove. Fit the spare bulb by pressing
and turning clockwise until it clicks. Refit the glass.
2
A
1
fig. 58