Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 96
Enables WPS PushButton button function.
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
6: Commands and Levels state disable Disables the ConsoleFlow client. state enable Enables the ConsoleFlow client. status update interval Sets the status update interval. write Stores the current configuration in permanent memory. cp functions (device-cp-functions) level commands clrscrn Clears the screen. exit Returns to the previous level. reset to factory defaults cp disable Disables reset to factory defaults button function. reset to factory defaults cp enable Enables reset to factory defaults button function. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. wps pushbutton cp disable Disables WPS PushButton button function. wps pushbutton cp enable Enables WPS PushButton button function. write Stores the current configuration in permanent memory. credentials (ssl-credentials) level commands clrscrn Clears the screen. create Create a new credential name delete Delete existing credential by name edit View or edit an existing credential exit Exits to the ssl level. show Show existing credential names show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. device (device) level commands auto show tlog Continuously displays the internal trouble log. clrscrn Clears the screen. cp functions Enters the cp functions level default long name Restores the default product long name. default short name Restores the default product short name. exit Exit to the enable level. long name Sets the product long name, displayed in command mode and the Web interface. reboot schedule Enters the reboot schedule level short name Sets the product short name, displayed in command mode and the Web interface. = maximum of eight characters. show Show system information show hardware information Displays information about the hardware. show history Displays the last 20 commands entered during the current CLI session. show lines Show line information show memory Displays current memory usage information. show task state Displays current task states. show tlog Displays the internal trouble log. write Stores the current configuration in permanent memory. dhcpserver (config-dhcpd) level commands clrscrn Clears the screen. default end ip address Restores end IP address of DHCP address pool to the default value. default end ipv6 address Clears the end IPv6 address of DHCP address pool. default lease time Restores the lease time to default value (24 hours). default start ip address Restores start IP address of DHCP address pool to the default value. default start ipv6 address Clears the start IPv6 address of DHCP address pool. delete all static leases Deletes all static leases. SGX™ 5150 IoT Device Gateway Command Reference 96