Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 249

6: Commands and Levels exit connect menu disable On the login connect menu, removes the menu item allowing the user to exit to the CLI. exit connect menu enable On the login connect menu, inserts the menu item allowing the user to exit to the CLI. line Enters the line level. = number of the line (serial port) to be configured. login connect menu disable Disables the login connect menu, so a user will get the CLI immediately after logging in. login connect menu enable Enables the login connect menu, so a user will get the menu rather than the CLI immediately after logging in. no send break Removes the configured send break character. preview connect menu Shows the layout of the connect menu with current settings. send break Sets the optional send break character. = the character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. terminal Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. terminal network Enters the configure-terminal level for the network. terminal type Sets the terminal type. tunnel Enters the tunnel level. = number of the tunnel line (serial port) to be configured. usb Enters the usb level. = number of the line (usb port) to be configured. write Stores the current configuration in permanent memory. traps (config-snmp-traps) level commands authentication password Sets password used for authentication for traps. authentication protocol md5 Uses MD5 for authentication for traps. authentication protocol sha Uses SHA for authentication for traps. clrscrn Clears the screen. community Sets the SNMP trap community string. = name of the trap community string to be set. default authentication protocol Restores to default SNMPv3 authentication method: MD5 for traps. default community Restores the SNMP trap community to default: public default primary destination port Restores the primary SNMP trap host port to default: 162. default privacy protocol Restores to default SNMPv3 privacy encryption method: DES for traps. default secondary destination Restores the secondary SNMP trap host port to default: 162. port default security Restores to default SNMPv3 security method: Authentication, No Privacy for traps. default version Restores to default SNMP version v2c for traps. exit Exits to the next higher level. no authentication password Clears authentication password for traps. no primary destination Deletes the primary SNMP trap host. no privacy password Clears privacy password for traps. no secondary destination Deletes the secondary SNMP trap host. no username Clears SNMPv3 username for traps. primary destination Sets the primary SNMP trap host. = IP address or hostname of SNMP trap receiver. primary destination port Sets the primary SNMP trap host port. privacy password Sets password used for privacy encryption for traps. privacy protocol aes Uses AES for privacy encryption for traps. privacy protocol des Uses DES for privacy encryption for traps. SGX™ 5150 IoT Device Gateway Command Reference 249