Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 216

6: Commands and Levels clrscrn Clears the screen. credentials Selects the RSA certificate by configured name. default duplex Restores the default duplex setting, which is auto. default eap-ttls option Restores the default EAP-TTLS protocol option, which is EAP-MSCHAP V2. default fast option Restores the default FAST authentication protocol option, which is MD5. default fast provisioning Restores the default FAST provisioning, which is Authenticated default ieee 802 1x Restores the default IEEE 802.1x protocol, which is EAP-TTLS. default peap option Restores the default PEAP authentication protocol option, which is EAP-MSCHAP V2. default speed Restores the default speed setting, which is auto-negotiate. duplex auto Sets duplex mode to auto. duplex full Sets duplex mode to full. duplex half Sets duplex mode to half. eap-ttls option chap Sets the EAP-TTLS authentication protocol option to CHAP. eap-ttls option eap-md5 Sets the EAP-TTLS authentication protocol option to EAP-MD5. eap-ttls option eap-mschapv2 Sets the EAP-TTLS authentication protocol option to EAP-MSCHAP V2. eap-ttls option mschap Sets the EAP-TTLS authentication protocol option to MSCHAP. eap-ttls option mschapv2 Sets the EAP-TTLS authentication protocol option to MSCHAP V2. eap-ttls option pap Sets the EAP-TTLS authentication protocol option to PAP. eapol disable Disables EAPoL Authentication. eapol enable Enables EAPoL Authentication exit Exit back to interface configuration level fast option gtc Sets the FAST authentication protocol option to GTC. fast option md5 Sets the FAST authentication protocol option to MD5. fast option mschapv2 Sets the FAST authentication protocol option to MSCHAPv2. fast provisioning authenticated Sets the FAST provisioning option to Authenticated. fast provisioning both Sets the FAST provisioning option to Both. fast provisioning unauthenticated Sets the FAST provisioning option to Unauthenticated. ieee 802 1x eap-tls Sets the IEEE 802.1x protocol to EAP-TLS. ieee 802 1x eap-ttls Sets the IEEE 802.1x protocol to EAP-TTLS. ieee 802 1x fast Sets the IEEE 802.1x protocol to FAST. ieee 802 1x peap Sets the IEEE 802.1x protocol to PEAP. inner credentials Selects the RSA certificate by configured name. no credentials Clears the RSA certificate name. no inner credentials Clears the RSA certificate name. no password Clears the password. no username Clears the user name. password Sets the password. = put quotes around the characters (max 63). peap option eap-md5 Sets the PEAP authentication protocol option to EAP-MD5. peap option eap-mschapv2 Sets the PEAP authentication protocol option to EAP-MSCHAP V2. peap option eap-tls Sets the PEAP authentication protocol option to EAP-TLS. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. speed 10 Sets the speed of the Ethernet link to 10 Mbps. speed 100 Sets the speed of the Ethernet link to 100 Mbps. speed auto Sets the speed of the Ethernet link to auto-negotiate. status Show link status username Sets the user name. validate certificate disable Disables server certificate verification. validate certificate enable Enables server certificate verification. write Stores the current configuration in permanent memory. SGX™ 5150 IoT Device Gateway Command Reference 216