Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 232
Clear the RSS Feed data, Display the RSS Feed status
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
6: Commands and Levels write Stores the current configuration in permanent memory. root level commands enable Enters the enable level. exit Exit from the system iperf Run iperf with command line parameters passed in quoted string. ping Ping destination continuously with 5 second timeout ping Ping destination n times with 5 second timeout ping Ping destination n times with x timeout (in seconds) ping6 Ping destination continuously with 5 second timeout ping6 Ping destination n times with 5 second timeout ping6 Ping destination n times with x timeout (in seconds) show Show system information show history Displays the last 20 commands entered during the current CLI session. show lines Show line information show multicast routes show state of VIFs and multicast routing tables show routes show system routing table show rules show system rules tcpdump dump traffic on a network trace route Trace route to destination trace route Trace route to destination using TCP, ICMP, or UDP rss (config-rss) level commands clear rss Clear the RSS Feed data clrscrn Clears the screen. default max entries Restores the default number of RSS feed entries. exit Exits to the configuration level. feed disable Disables RSS feed. feed enable Enables RSS feed. max entries Sets the maximum number of RSS feed entries. persist disable Disables RSS feed data persistence. persist enable Enables RSS feed data persistence. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status Display the RSS Feed status write Stores the current configuration in permanent memory. rss (modbus-rss) level commands clrscrn Clears the screen. exit Exits to the next higher level. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. trace input disable Disables RSS trace of Modbus PDUs received on the serial line. trace input enable Enables RSS trace of Modbus PDUs received on the serial line. write Stores the current configuration in permanent memory. security (config-security) level commands clrscrn Clears the screen. exit Returns to the config level. fips 140-2 mode disable Disables the FIPS 140-2 Mode. fips 140-2 mode enable Enables the FIPS 140-2 Mode. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. serial (tunnel-serial:) level commands ( is the number of the line) SGX™ 5150 IoT Device Gateway Command Reference 232