Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 183
host 3 config-host:3 level commands, Clears the name of the host.
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
6: Commands and Levels ssh username Sets the SSH user name for use when establishing tunneling connections with other devices. = SSH user name. tcp keep alive Sets the TCP keep alive idle time. This is the initial keep alive timeout. = timer value, in milliseconds. tcp keep alive interval Enables TCP keep alive for connect mode tunneling and sets the timer. = TCP keep alive for connect mode in milliseconds. tcp keep alive probes Sets the number of TCP keep alive probes. = number of TCP keep alive probes. tcp user timeout Sets the timeout for TCP retransmissions. = timeout value, in milliseconds. tunnel buffer size Sets the maximum tunnel data to be buffered. = buffer size, in Mbytes. tunnel buffer state disable Disables buffering of tunnel data. tunnel buffer state enable Enables buffering of tunnel data when network connection is lost or not established. validate certificate disable Skips verification of the server certificate when connecting. validate certificate enable Requires verification of the server certificate when connecting. write Stores the current configuration in permanent memory. host 3 (config-host:3) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username Sets the username for logging into the host via SSH. = username. write Stores the current configuration in permanent memory. host 30 (config-host:30) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. SGX™ 5150 IoT Device Gateway Command Reference 183