Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 240
static route 1 config-staticroute:1 level commands
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
6: Commands and Levels no mac address Removes the MAC Address. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. static leases Change to dhcpd static lease level. write Stores the current configuration in permanent memory. static leases 8 (config-dhcpd-static_leases:8) level commands clrscrn Clears the screen. exit Exits to the config-dhcpd level. ip address Sets the reserved IP address. ipv6 address Sets the reserved IPv6 address. IPv6 addresses are written in eight groups of four hexadecimal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334 Network address ranges are written in CIDR notation. A network is denoted by the first address in the block (ending in all zeroes), a slash (/), and a decimal value equal to the size in bits of the prefix no ip address Clears the reserved IP address. no ipv6 address Clears the reserved IPv6 address. no mac address Removes the MAC Address. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. static leases Change to dhcpd static lease level. write Stores the current configuration in permanent memory. static route 1 (config-staticroute:1) level commands clrscrn Clears the screen. default metric Restores the metric to default value. exit Exits to the config-gateway level. friendly name Set the friendly name for static route. = friendly name gateway Sets the gateway for static route network. interface Sets the route interface = interface name metric Sets the metric for static route. = metric network Sets the IP address and network mask for static route network. no friendly name Remove the friendly name no gateway Clears the gateway for static route network. no interface Clears the route interface. The WAN interface is used if no interface is specified. no network Clears the IP address for static route network. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. state disable Disables the static route. state enable Enables the static route. static route Change to config gateway static route level. write Stores the current configuration in permanent memory. static route 2 (config-staticroute:2) level commands clrscrn Clears the screen. default metric Restores the metric to default value. exit Exits to the config-gateway level. friendly name Set the friendly name for static route. = friendly name gateway Sets the gateway for static route network. interface Sets the route interface = interface name metric Sets the metric for static route. = metric network Sets the IP address and network mask for static route network. no friendly name Remove the friendly name no gateway Clears the gateway for static route network. no interface Clears the route interface. The WAN interface is used if no interface is specified. no network Clears the IP address for static route network. SGX™ 5150 IoT Device Gateway Command Reference 240