Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 250
No Authentication, No Privacy for traps.
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
6: Commands and Levels secondary destination Sets the secondary SNMP trap host. = IP address or hostname of SNMP trap receiver. secondary destination port Sets the secondary SNMP trap host port. security authentication and privacy Authentication and Privacy for traps. security authentication but no Authentication, No Privacy for traps. privacy security no authentication and No Authentication, No Privacy for traps. no priv show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. username Sets SNMPv3 username for traps. version snmpv1 Uses SNMPv1 for traps. version snmpv2c Uses SNMPv2c for traps. version snmpv3 Uses SNMPv3 for traps. write Stores the current configuration in permanent memory. trusted authorities (ssl-auth) level commands add Adds an Authority Certificate. clrscrn Clears the screen. exit Exits to the ssl level. no intermediate authority Removes an Intermediate Authority Certificate. = index displayed by "show authority" command. no trusted authority Removes a Trusted Authority Certificate. = index displayed by "show authority" command. show Displays Authority Certificate Information. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. tunnel (tunnel:) level commands ( is the number of the line) accept Enters the accept level for this tunnel. auto show statistics show connection statistics bluetooth serial Enters the bluetooth serial level. = number of the Bluetooth SPP line to be configured. clear counters Zeros all tunnel counters clrscrn Clears the screen. connect Enters the connect level for this tunnel. disconnect Enters the disconnect level for this tunnel. exit Exits to the enable level. line Enters the line level. = number of the line (serial port) to be configured. modem Enters the modem level for this tunnel. no clear counters Unzeros all tunnel counters packing Enters the packing level for this tunnel. serial Enters the serial level for this tunnel. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics terminal Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. terminal network Enters the configure-terminal level for the network. tunnel Enters the tunnel level. = number of the tunnel line (serial port) to be configured. usb Enters the usb level. = number of the line (usb port) to be configured. write Stores the current configuration in permanent memory. unreachable host detection (config-vpn-unreachable_host_detection:1) level commands clrscrn Clears the screen. SGX™ 5150 IoT Device Gateway Command Reference 250