Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 190

host 7 tunnel-connect-host, 7 level commands, is the number of the line

Page 190 highlights

6: Commands and Levels protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username Sets the username for logging into the host via SSH. = username. write Stores the current configuration in permanent memory. host 7 (tunnel-connect-host::7) level commands ( is the number of the line) address Sets the remote host to establish tunneling connections with. = IP address or host name of the remote host. aes decrypt key Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes decrypt key text Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. aes encrypt key Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes encrypt key text Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. auto show statistics show connection statistics clrscrn Clears the screen. credentials Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default connect mode tunneling protocol as 'TCP'. default secure protocols Restores the default secure protocol selections. default tcp keep alive Defaults the TCP keep alive idle time. default tcp keep alive interval Restores the default 45 second connect mode TCP keep alive timeout. default tcp keep alive probes Defaults the TCP keep alive probes. default tunnel buffer size Defaults the tunnel buffer size. exit Exits to the next higher level. initial send binary Sets the host connect tunnel Initial Send text allowing for binary characters. = string in binary format that will be sent out the network upon connection. Within [] use binary decimal up to 255 or hex up to 0xFF. initial send set Sets the host connect tunnel Initial Send text. = ascii string that will be sent out the network upon connection. no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt key. no aes encrypt key Removes the connect tunnel AES encrypt key. no credentials Clears the RSA/DSA certificate selection for the SSL client. no initial send Removes the host connect tunnel Initial Send string. no port Removes the remote port used to establish tunnel connections. no ssh username Removes the SSH user name. no tcp user timeout Restores the default. port Sets the remote port to use for connect mode tunneling. = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunneling. SGX™ 5150 IoT Device Gateway Command Reference 190

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257

6:
Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference
190
protocol telnet
Sets the protocol to Telnet.
remote address
<text>
Sets the IP address of the remote host to connect to when this host is selected on
the login connect menu. <text> = IP address.
remote port
<number>
Sets the remote port used to connect to the host. <number> = port to be used.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
ssh username
<text>
Sets the username for logging into the host via SSH. <text> = username.
write
Stores the current configuration in permanent memory.
host 7 (tunnel-connect-host:
<line>
:7) level commands (
<line>
is the number of the line)
address
<text>
Sets the remote host to establish tunneling connections with. <text> = IP address or
host name of the remote host.
aes decrypt key
<hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is
represented by two adjacent hex digits. Bytes may run together or be separated by
optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that
quotes must enclose the value if it contains spaces.
aes decrypt key text
<text>
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is
represented by a single character. Note that quotes must enclose the value if it
contains spaces.
aes encrypt key
<hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is
represented by two adjacent hex digits. Bytes may run together or be separated by
optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that
quotes must enclose the value if it contains spaces.
aes encrypt key text
<text>
Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is
represented by a single character. Note that quotes must enclose the value if it
contains spaces.
auto show statistics
show connection statistics
clrscrn
Clears the screen.
credentials
<text>
Selects the RSA/DSA certificates by name for the SSL client.
default protocol
Restores the default connect mode tunneling protocol as 'TCP'.
default secure protocols
Restores the default secure protocol selections.
default tcp keep alive
Defaults the TCP keep alive idle time.
default tcp keep alive interval
Restores the default 45 second connect mode TCP keep alive timeout.
default tcp keep alive probes
Defaults the TCP keep alive probes.
default tunnel buffer size
Defaults the tunnel buffer size.
exit
Exits to the next higher level.
initial send binary
<binary>
Sets the host connect tunnel Initial Send text allowing for binary characters. <binary>
= string in binary format that will be sent out the network upon connection. Within []
use binary decimal up to 255 or hex up to 0xFF.
initial send set
<text>
Sets the host connect tunnel Initial Send text. <text> = ascii string that will be sent
out the network upon connection.
no address
Removes the remote host address used to establish tunneling connections.
no aes decrypt key
Removes the connect tunnel AES decrypt key.
no aes encrypt key
Removes the connect tunnel AES encrypt key.
no credentials
Clears the RSA/DSA certificate selection for the SSL client.
no initial send
Removes the host connect tunnel Initial Send string.
no port
Removes the remote port used to establish tunnel connections.
no ssh username
Removes the SSH user name.
no tcp user timeout
Restores the default.
port
<number>
Sets the remote port to use for connect mode tunneling. <number> = number of the
port to use.
protocol ssh
Uses SSH protocol for connect mode tunneling.
protocol ssl
Uses SSL protocol for connect mode tunneling.
protocol tcp
Uses TCP protocol for connect mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for connect mode tunneling.
protocol telnet
Uses Telnet protocol (with IAC) for connect mode tunneling.