Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 235

snmp trap config-action-snmp_trap:eth0 link state change level commands

Get Lantronix SGX 5150 IoT Device Gateway PDF manuals and user guides View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals

Page 235 highlights

6: Commands and Levels snmp trap (config-action-snmp_trap:wlan0 link state change) level commands alarm message Sets the message to be sent when the alarm turns on. clrscrn Clears the screen. exit Exits to the next higher level. no alarm message Removes the alarm message. no normal message Removes the normal message. no reminder interval Clears the SNMP Trap reminder interval. SNMP Trap is sent once only. normal message Sets the message to be sent when the alarm turns off. reminder interval Sets the SNMP Trap reminder interval. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. state disable Does not send SNMP Trap. state enable Sends SNMP Trap when alarm condition is met. write Stores the current configuration in permanent memory. snmp trap (config-action-snmp_trap:usb0 link state change) level commands alarm message Sets the message to be sent when the alarm turns on. clrscrn Clears the screen. exit Exits to the next higher level. no alarm message Removes the alarm message. no normal message Removes the normal message. no reminder interval Clears the SNMP Trap reminder interval. SNMP Trap is sent once only. normal message Sets the message to be sent when the alarm turns off. reminder interval Sets the SNMP Trap reminder interval. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. state disable Does not send SNMP Trap. state enable Sends SNMP Trap when alarm condition is met. write Stores the current configuration in permanent memory. snmp trap (config-action-snmp_trap:on scheduled reboot) level commands alarm message Sets the message to be sent when the alarm turns on. clrscrn Clears the screen. exit Exits to the next higher level. no alarm message Removes the alarm message. no normal message Removes the normal message. no reminder interval Clears the SNMP Trap reminder interval. SNMP Trap is sent once only. normal message Sets the message to be sent when the alarm turns off. reminder interval Sets the SNMP Trap reminder interval. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. state disable Does not send SNMP Trap. state enable Sends SNMP Trap when alarm condition is met. write Stores the current configuration in permanent memory. snmp trap (config-action-snmp_trap:eth0 link state change) level commands alarm message Sets the message to be sent when the alarm turns on. clrscrn Clears the screen. exit Exits to the next higher level. no alarm message Removes the alarm message. no normal message Removes the normal message. no reminder interval Clears the SNMP Trap reminder interval. SNMP Trap is sent once only. normal message Sets the message to be sent when the alarm turns off. reminder interval Sets the SNMP Trap reminder interval. show Shows the current configuration. SGX™ 5150 IoT Device Gateway Command Reference 235

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
6:
Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference
235
snmp trap (config-action-snmp_trap:wlan0 link state change) level commands
alarm message
<text>
Sets the message to be sent when the alarm turns on.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no alarm message
Removes the alarm message.
no normal message
Removes the normal message.
no reminder interval
Clears the SNMP Trap reminder interval. SNMP Trap is sent once only.
normal message
<text>
Sets the message to be sent when the alarm turns off.
reminder interval
<minutes>
Sets the SNMP Trap reminder interval.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Does not send SNMP Trap.
state enable
Sends SNMP Trap when alarm condition is met.
write
Stores the current configuration in permanent memory.
snmp trap (config-action-snmp_trap:usb0 link state change) level commands
alarm message
<text>
Sets the message to be sent when the alarm turns on.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no alarm message
Removes the alarm message.
no normal message
Removes the normal message.
no reminder interval
Clears the SNMP Trap reminder interval. SNMP Trap is sent once only.
normal message
<text>
Sets the message to be sent when the alarm turns off.
reminder interval
<minutes>
Sets the SNMP Trap reminder interval.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Does not send SNMP Trap.
state enable
Sends SNMP Trap when alarm condition is met.
write
Stores the current configuration in permanent memory.
snmp trap (config-action-snmp_trap:on scheduled reboot) level commands
alarm message
<text>
Sets the message to be sent when the alarm turns on.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no alarm message
Removes the alarm message.
no normal message
Removes the normal message.
no reminder interval
Clears the SNMP Trap reminder interval. SNMP Trap is sent once only.
normal message
<text>
Sets the message to be sent when the alarm turns off.
reminder interval
<minutes>
Sets the SNMP Trap reminder interval.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Does not send SNMP Trap.
state enable
Sends SNMP Trap when alarm condition is met.
write
Stores the current configuration in permanent memory.
snmp trap (config-action-snmp_trap:eth0 link state change) level commands
alarm message
<text>
Sets the message to be sent when the alarm turns on.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no alarm message
Removes the alarm message.
no normal message
Removes the normal message.
no reminder interval
Clears the SNMP Trap reminder interval. SNMP Trap is sent once only.
normal message
<text>
Sets the message to be sent when the alarm turns off.
reminder interval
<minutes>
Sets the SNMP Trap reminder interval.
show
Shows the current configuration.