Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 186
host 4 config-host:4 level commands, host 5 tunnel-connect-host, 5 level commands, is the number
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
6: Commands and Levels tcp keep alive interval Enables TCP keep alive for connect mode tunneling and sets the timer. = TCP keep alive for connect mode in milliseconds. tcp keep alive probes Sets the number of TCP keep alive probes. = number of TCP keep alive probes. tcp user timeout Sets the timeout for TCP retransmissions. = timeout value, in milliseconds. tunnel buffer size Sets the maximum tunnel data to be buffered. = buffer size, in Mbytes. tunnel buffer state disable Disables buffering of tunnel data. tunnel buffer state enable Enables buffering of tunnel data when network connection is lost or not established. validate certificate disable Skips verification of the server certificate when connecting. validate certificate enable Requires verification of the server certificate when connecting. write Stores the current configuration in permanent memory. host 4 (config-host:4) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username Sets the username for logging into the host via SSH. = username. write Stores the current configuration in permanent memory. host 5 (tunnel-connect-host::5) level commands ( is the number of the line) address Sets the remote host to establish tunneling connections with. = IP address or host name of the remote host. aes decrypt key Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes decrypt key text Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. aes encrypt key Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes encrypt key text Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. auto show statistics show connection statistics clrscrn Clears the screen. credentials Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default connect mode tunneling protocol as 'TCP'. default secure protocols Restores the default secure protocol selections. default tcp keep alive Defaults the TCP keep alive idle time. SGX™ 5150 IoT Device Gateway Command Reference 186