Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 236

6: Commands and Levels show history Displays the last 20 commands entered during the current CLI session. state disable Does not send SNMP Trap. state enable Sends SNMP Trap when alarm condition is met. write Stores the current configuration in permanent memory. snmpd (config-snmp-snmpd) level commands authentication password Sets password used for authentication for agent. authentication protocol md5 Uses MD5 for authentication for agent. authentication protocol sha Uses SHA for authentication for agent. clrscrn Clears the screen. default authentication protocol Restores to default SNMPv3 authentication method: MD5 for agent. default port Restores the SNMP agent port to default: 161. default privacy protocol Restores to default SNMPv3 privacy encryption method: DES for agent. default read community Restores the SNMP read-only community to default: public default read-only authentication Restores to default SNMPv3 read-only authentication method: MD5 for agent. protocol default read-only privacy protocol Restores to default SNMPv3 read-only privacy encryption method: DES for agent. default read-only security Restores to default SNMPv3 read-only security method: Authentication, No Privacy for agent. default security Restores to default SNMPv3 security method: Authentication, No Privacy for agent. default system description Restores the SNMP system description to its default. default system name Restores the SNMP system name to default: the product name. default version Restores to default SNMP version v2c for agent. default write community Clears the SNMP read/write community to default: private exit Exits to the next higher level. no authentication password Clears authentication password for agent. no privacy password Clears privacy password for agent. no read-only authentication password Clears read-only authentication password for agent. no read-only privacy password Clears read-only privacy password for agent. no read-only username Clears SNMPv3 read-only username for agent. no system contact Clears the SNMP system contact. no username Clears SNMPv3 username for agent. port Sets the SNMP agent port. privacy password Sets password used for privacy encryption for agent. privacy protocol aes Uses AES for privacy encryption for agent. privacy protocol des Uses DES for privacy encryption for agent. read community Sets the SNMP read-only community string. = name of the read-only community string to be set. read-only authentication password Sets password used for read-only authentication for agent. read-only authentication protocol md5 Uses MD5 for read-only authentication for agent. read-only authentication protocol sha Uses SHA for read-only authentication for agent. read-only privacy password Sets password used for read-only privacy encryption for agent. read-only privacy protocol aes Uses AES for read-only privacy encryption for agent. read-only privacy protocol des Uses DES for read-only privacy encryption for agent. read-only security authentication and privacy Authentication and Privacy for agent. read-only security Authentication, No Privacy for agent. authentication but no privacy SGX™ 5150 IoT Device Gateway Command Reference 236