Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 95

6: Commands and Levels protocol ftp Selects FTP Protocol. protocol ftps Selects FTPS Protocol. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. username Sets the Username used to logon to FTP server. write Stores the current configuration in permanent memory. consoleflow (config-consoleflow) level commands active connection connection Sets active connection to Connection . allow remote connections disable Disables ConsoleFlow remote access. allow remote connections enable Enables ConsoleFlow remote access. apply configuration updates Sets the action on configuration updates to Always, signifying that the device will always always apply configuration updates. apply configuration updates if Sets the action on configuration updates to If unchanged, signifying that the device unchanged will only apply configuration updates if no changes have been made locally. apply configuration updates Sets the action on configuration updates to Never, signifying no configuration never updates will be applied. apply firmware updates disable Restores the default action on new firmware (do not apply). apply firmware updates enable Automatically apply new firmware. audit log disable Disables audit log. audit log enable Enables audit log. clrscrn Clears the screen. connection Enters the next lower level. Specify the instance for the next lower level. content check interval Sets the firmware and configuration check interval. default active connection Restores the default active connection, which is Connection 1. default apply configuration updates Restores the default setting for configuration updates (Never). default content check interval Restores the default firmware and configuration check interval. default remote access local port Clears the local port for ConsoleFlow Remote Access. default status update interval Restores the default status update interval. device description Sets the Device Description. device id Sets the Device ID. device key Sets the Device Key. device name Sets the Device Name. exit Returns to the config level. line Change to line configuration level. no device description Removes the Device Description. no device id Removes the Device ID. no device key Removes the Device Key. no device name Removes the Device Name. reboot after firmware update Restores the default action when new firmware is applied (reboot) disable reboot after firmware update Enables automatic reboot when new firmware is applied. enable reboot after update disable Restores the default action when new configuration is applied (do not reboot) reboot after update enable Enables automatic reboot when new configuration is applied. remote access local port Sets the local port for ConsoleFlow Remote Access. When configured, a total of 16 consecutive ports will be reserved. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics Displays the ConsoleFlow statistics. SGX™ 5150 IoT Device Gateway Command Reference 95