Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 255
Sets IKE DH Group to DH1.
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
6: Commands and Levels esp dh group dh2 esp dh group dh5 esp encryption 3des esp encryption aes128 esp encryption aes256 esp encryption any esp encryption des exit ike authentication any ike authentication md5 ike authentication sha1 ike authentication sha2 ike dh group any ike dh group dh1 ike dh group dh14 ike dh group dh2 ike dh group dh5 ike encryption 3des ike encryption aes128 ike encryption aes256 ike encryption any ike encryption des ike life time ikev2 insist ikev2 never ikev2 permit ikev2 propose interface local id local key length local next hop local subnet mode configuration disable mode configuration enable nat traversal disable nat traversal enable no connection name no local id no local next hop no local subnet no password no psk no remote endpoint no remote id no remote key no remote next hop no remote rsa key no remote subnet no username Sets ESP DH Group to DH2. Sets ESP DH Group to DH5. Sets ESP encryption to 3DES. Sets ESP encryption to AES-128. Sets ESP encryption to AES-256. Sets ESP encryption to any. Sets ESP encryption to DES. Exits to the config level. Sets IKE authentication to any. Sets IKE authentication to MD5. Sets IKE authentication to SHA1. Sets IKE authentication to SHA2. Sets IKE DH Group to any. Sets IKE DH Group to DH1. Sets IKE DH Group to DH14. Sets IKE DH Group to DH2. Sets IKE DH Group to DH5. Sets IKE encryption to 3DES. Sets IKE encryption to AES-128. Sets IKE encryption to AES-256. Sets IKE encryption to any. Sets IKE encryption to DES. Sets the IKE lifetime. Sets the IKEv2 setting to Insist, signifying that the device will only accept and receive IKEv2 and IKEv1 negotiations will be rejected. Sets the IKEv2 setting to Never, signifying no IKEv2 negotiation should be transmitted or accepted. Sets the IKEv2 setting to Permit, signifying no IKEv2 should be transmitted, but will be accepted if the other ends initiates to us with IKEv2. Sets the IKEv2 setting to Propose, signifying that the device will permit IKEv2, and also use it as the default to initiate. Sets the interface. = interface. Sets the local id. = local id. Sets the local RSA key length. Sets the local next hop. = local next hop. Sets the local subnet. = local subnet. Disables mode configuration. Enables mode configuration. Disables NAT traversal. Enables NAT traversal. Clears the name. Clears the local id. Clears the local next hop. Clears the local subnet. Clears the password. Clears the pre shared key. Clears the remote end point. Clears the remote id. Clears the remote key. Clears the remote next hop. Clears the remote RSA key. Clears the remote subnets. Clears the username. SGX™ 5150 IoT Device Gateway Command Reference 255