Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 82
Removes the Bridging IPv6 Address.
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
6: Commands and Levels auto detect ipv6 address disable Disables learning the global IPv6 address of the bridged client. auto detect ipv6 address enable Enables learning the global IPv6 address of the bridged client. bridging initial scan interval Sets the scan interval before learning the IP address of the bridged client. bridging ip address Sets the Bridging IP Address. bridging ipv6 address Sets the Bridging IPv6 Address. IPv6 addresses are written in eight groups of four hexadecimal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334 Network address ranges are written in CIDR notation. A network is denoted by the first address in the block (ending in all zeroes), a slash (/), and a decimal value equal to the size in bits of the prefix bridging mode host Sets the bridging mode to 'Host'. bridging mode network Sets the bridging mode to 'Network'. bridging mode static network Sets the bridging mode to 'Static Network'. bridging scan interval Sets the scan interval after learning the IP address of the bridged client. clrscrn Clears the screen. default bridging initial scan interval Restores the default initial scan interval. default bridging mode Restores the default bridging mode. default bridging scan interval Restores the default scan interval. default ethernet interface Restores the default Bridging ethernet interface. ethernet interface Sets the Bridging ethernet interface. exit Exits to the config level. network access for gateway Disables network access for gateway in transparent bridging mode. disable network access for gateway Enables network access for gateway in transparent bridging mode. enable no bridging ip address Removes the Bridging MAC Address. no bridging ipv6 address Removes the Bridging IPv6 Address. no bridging mac address Removes the Bridging MAC Address. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics Show bridge statistics show status Show bridge status state disable Disables bridging. state enable Enables bridging. transparent mode disable Disables transparent mode. transparent mode enable Enables transparent mode. write Stores the current configuration in permanent memory. choice 1 (config-wlan-choice:wlan0:1) level commands apply wlan Try out WLAN settings without saving them to Flash. If the settings do not work, when you reboot the device, it will still have the original settings. clrscrn Clears the screen. exit Exits to the next higher level. no profile Removes reference to the profile. profile Selects a profile. = name of the profile. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. choice 2 (config-wlan-choice:wlan0:2) level commands SGX™ 5150 IoT Device Gateway Command Reference 82