Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 175
host 17 config-host:17 level commands, Exits to the configuration level.
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
6: Commands and Levels protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username Sets the username for logging into the host via SSH. = username. write Stores the current configuration in permanent memory. host 17 (config-host:17) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username Sets the username for logging into the host via SSH. = username. write Stores the current configuration in permanent memory. host 18 (config-host:18) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username Sets the username for logging into the host via SSH. = username. write Stores the current configuration in permanent memory. host 19 (config-host:19) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. SGX™ 5150 IoT Device Gateway Command Reference 175