Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 172

6: Commands and Levels default tcp keep alive interval Restores the default 45 second connect mode TCP keep alive timeout. default tcp keep alive probes Defaults the TCP keep alive probes. default tunnel buffer size Defaults the tunnel buffer size. exit Exits to the next higher level. initial send binary Sets the host connect tunnel Initial Send text allowing for binary characters. = string in binary format that will be sent out the network upon connection. Within [] use binary decimal up to 255 or hex up to 0xFF. initial send set Sets the host connect tunnel Initial Send text. = ascii string that will be sent out the network upon connection. no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt key. no aes encrypt key Removes the connect tunnel AES encrypt key. no credentials Clears the RSA/DSA certificate selection for the SSL client. no initial send Removes the host connect tunnel Initial Send string. no port Removes the remote port used to establish tunnel connections. no ssh username Removes the SSH user name. no tcp user timeout Restores the default. port Sets the remote port to use for connect mode tunneling. = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunneling. protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. secure protocols ssl3 disable Disables the protocol. secure protocols ssl3 enable Enables the protocol. secure protocols tls1.0 disable Disables the protocol. secure protocols tls1.0 enable Enables the protocol. secure protocols tls1.1 disable Disables the protocol. secure protocols tls1.1 enable Enables the protocol. secure protocols tls1.2 disable Disables the protocol. secure protocols tls1.2 enable Enables the protocol. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username Sets the SSH user name for use when establishing tunneling connections with other devices. = SSH user name. tcp keep alive Sets the TCP keep alive idle time. This is the initial keep alive timeout. = timer value, in milliseconds. tcp keep alive interval Enables TCP keep alive for connect mode tunneling and sets the timer. = TCP keep alive for connect mode in milliseconds. tcp keep alive probes Sets the number of TCP keep alive probes. = number of TCP keep alive probes. tcp user timeout Sets the timeout for TCP retransmissions. = timeout value, in milliseconds. tunnel buffer size Sets the maximum tunnel data to be buffered. = buffer size, in Mbytes. tunnel buffer state disable Disables buffering of tunnel data. tunnel buffer state enable Enables buffering of tunnel data when network connection is lost or not established. validate certificate disable Skips verification of the server certificate when connecting. validate certificate enable Requires verification of the server certificate when connecting. write Stores the current configuration in permanent memory. SGX™ 5150 IoT Device Gateway Command Reference 172