Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 195

6: Commands and Levels tcp user timeout Sets the timeout for TCP retransmissions. = timeout value, in milliseconds. tunnel buffer size Sets the maximum tunnel data to be buffered. = buffer size, in Mbytes. tunnel buffer state disable Disables buffering of tunnel data. tunnel buffer state enable Enables buffering of tunnel data when network connection is lost or not established. validate certificate disable Skips verification of the server certificate when connecting. validate certificate enable Requires verification of the server certificate when connecting. write Stores the current configuration in permanent memory. host 9 (config-host:9) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet. remote address Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. remote port Sets the remote port used to connect to the host. = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username Sets the username for logging into the host via SSH. = username. write Stores the current configuration in permanent memory. http (config-http) level commands auth Creates a new HTTP server authentication directive. = URI of the server. auth type digest Sets an HTTP server authentication directive to the Digest Access Authentication scheme. = URI of the server. auth type none Sets the authentication type for an HTTP server authentication directive to none. = URI of the server. authentication timeout For any Digest AuthType, sets the timeout for authentication. = authentication timeout value. clear counters Sets the HTTP counters to zero. clear log Clears the HTTP server log. clrscrn Clears the screen. default authentication timeout Resets the authentication timeout to its default value. default log format Restores the HTTP Server log format string to its default value. default max bytes Resets the maximum bytes to its default value. default max log entries Restores the default maximum number of HTTP Server log entries. default max timeout Resets the timeout to its default value. default port Resets the HTTP Server port to its default value. default secure port Resets the HTTP Server SSL port to its default value. default secure protocols Restores the default secure protocol selections. delete auth Deletes an existing HTTP Server authentication directive. = URI of the server. exit Returns to the config level. https state disable Disables the HTTPS server. https state enable Enables the HTTPS server. log format Sets the log format string for the HTTP server, using the following directives: %a remote ip address (could be a proxy) %b bytes sent excluding headers %B bytes SGX™ 5150 IoT Device Gateway Command Reference 195