Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 189

host 6 config-host:6 level commands

Get Lantronix SGX 5150 IoT Device Gateway PDF manuals and user guides View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals

Page 189 highlights

6: Commands and Levels no credentials Clears the RSA/DSA certificate selection for the SSL client. no initial send Removes the host connect tunnel Initial Send string. no port Removes the remote port used to establish tunnel connections. no ssh username Removes the SSH user name. no tcp user timeout Restores the default. port Sets the remote port to use for connect mode tunneling. = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunneling. protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. secure protocols ssl3 disable Disables the protocol. secure protocols ssl3 enable Enables the protocol. secure protocols tls1.0 disable Disables the protocol. secure protocols tls1.0 enable Enables the protocol. secure protocols tls1.1 disable Disables the protocol. secure protocols tls1.1 enable Enables the protocol. secure protocols tls1.2 disable Disables the protocol. secure protocols tls1.2 enable Enables the protocol. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username Sets the SSH user name for use when establishing tunneling connections with other devices. = SSH user name. tcp keep alive Sets the TCP keep alive idle time. This is the initial keep alive timeout. = timer value, in milliseconds. tcp keep alive interval Enables TCP keep alive for connect mode tunneling and sets the timer. = TCP keep alive for connect mode in milliseconds. tcp keep alive probes Sets the number of TCP keep alive probes. = number of TCP keep alive probes. tcp user timeout Sets the timeout for TCP retransmissions. = timeout value, in milliseconds. tunnel buffer size Sets the maximum tunnel data to be buffered. = buffer size, in Mbytes. tunnel buffer state disable Disables buffering of tunnel data. tunnel buffer state enable Enables buffering of tunnel data when network connection is lost or not established. validate certificate disable Skips verification of the server certificate when connecting. validate certificate enable Requires verification of the server certificate when connecting. write Stores the current configuration in permanent memory. host 6 (config-host:6) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. SGX™ 5150 IoT Device Gateway Command Reference 189

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
6:
Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference
189
no credentials
Clears the RSA/DSA certificate selection for the SSL client.
no initial send
Removes the host connect tunnel Initial Send string.
no port
Removes the remote port used to establish tunnel connections.
no ssh username
Removes the SSH user name.
no tcp user timeout
Restores the default.
port
<number>
Sets the remote port to use for connect mode tunneling. <number> = number of the
port to use.
protocol ssh
Uses SSH protocol for connect mode tunneling.
protocol ssl
Uses SSL protocol for connect mode tunneling.
protocol tcp
Uses TCP protocol for connect mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for connect mode tunneling.
protocol telnet
Uses Telnet protocol (with IAC) for connect mode tunneling.
protocol udp
Uses UDP protocol for connect mode tunneling.
protocol udp aes
Uses UDP protocol with AES encryption for connect mode tunneling.
secure protocols ssl3 disable
Disables the protocol.
secure protocols ssl3 enable
Enables the protocol.
secure protocols tls1.0 disable Disables the protocol.
secure protocols tls1.0 enable
Enables the protocol.
secure protocols tls1.1 disable Disables the protocol.
secure protocols tls1.1 enable
Enables the protocol.
secure protocols tls1.2 disable Disables the protocol.
secure protocols tls1.2 enable
Enables the protocol.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
show statistics
show connection statistics
ssh username
<text>
Sets the SSH user name for use when establishing tunneling connections with other
devices. <text> = SSH user name.
tcp keep alive
<milliseconds>
Sets the TCP keep alive idle time. This is the initial keep alive timeout.
<milliseconds> = timer value, in milliseconds.
tcp keep alive interval
<milliseconds>
Enables TCP keep alive for connect mode tunneling and sets the timer.
<milliseconds> = TCP keep alive for connect mode in milliseconds.
tcp keep alive probes
<number>
Sets the number of TCP keep alive probes. <number> = number of TCP keep alive
probes.
tcp user timeout
<milliseconds>
Sets the timeout for TCP retransmissions. <milliseconds> = timeout value, in
milliseconds.
tunnel buffer size
<Mbytes>
Sets the maximum tunnel data to be buffered. <Mbytes> = buffer size, in Mbytes.
tunnel buffer state disable
Disables buffering of tunnel data.
tunnel buffer state enable
Enables buffering of tunnel data when network connection is lost or not established.
validate certificate disable
Skips verification of the server certificate when connecting.
validate certificate enable
Requires verification of the server certificate when connecting.
write
Stores the current configuration in permanent memory.
host 6 (config-host:6) level commands
clrscrn
Clears the screen.
default protocol
Restores the default value of the protocol (Telnet).
default remote port
Sets the remote port (used to connect to the host) to the default value, which
depends on the selected protocol.
exit
Exits to the configuration level.
host
<number>
Change to config host level
name
<text>
Sets the name of the host. <text> = name of the host.
no name
Clears the name of the host.
no remote address
Clears the remote address of the host.
no ssh username
Clears the SSH username associated with the host.
protocol ssh
Sets the protocol to SSH.