Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 86

6: Commands and Levels connect mode always Enables the tunneling server to always establish tunneling connections. connect mode any character Enables the tunneling server to establish a tunneling connection when a character is received on the corresponding line (serial port). connect mode disable Disables connect mode tunneling. connect mode modem control Enables the tunneling server to make tunneling connections when the modem asserted control pin is asserted. connect mode modem emulation Enables modem emulation for connect mode tunneling. connect mode start character Enables connect mode tunneling when the configured start character is received on the line. default connect mode Restores the default connect mode as 'disable'. default host mode Connects to the first host in the list that accepts the connection. default local port Uses a random port number as the local port for establishing tunneling connections to other devices. default reconnect time Restores the default reconnect time value for connect mode tunneling. default start character Defaults the connect mode start character. email connect Sets an email profile to use to send an email alert upon establishing a connect mode tunnel. = the number of the email profile to use. email disconnect Sets an email profile to use to send an email alert upon closing a connect mode tunnel. = the number of the email profile to use. exit Returns to the tunnel level. flush serial disable Characters already in the serial data buffer are retained upon establishing a connect mode tunneling connection. flush serial enable Flushes the serial data buffer upon establishing a connect mode tunneling connection. flush start character disable Enables forwarding of the connect start character into the network. flush start character enable Disables forwarding of the connect start character into the network. host Enters the next lower level. Specify the instance for the next lower level. host mode sequential Connects to the first host in the list that accepts the connection. host mode simultaneous Selects simultaneous connections to all hosts on the host list. kill connection Disconnects the active connect mode tunneling connection or connections. local port Sets a specific port for use as the local port. = the number of the port to use. no email connect Discontinues sending email alerts upon establishing a connect mode tunnel. no email disconnect Discontinues sending email alerts upon closing a connect mode tunnel. promote host Promotes the identified host, exchanging it place with the host above it, to adjust the order of the defined hosts. reconnect time Sets the reconnect time value for tunneling connections established by the device in milliseconds. = timeout in milliseconds. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status Displays tunnel connect status. start character Sets the connect mode start character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. write Stores the current configuration in permanent memory. connection 1 (config-consoleflow-connection:1) level commands clrscrn Clears the screen. connect to cloud Sets the connection to the Cloud based server. connect to on-premise Sets the connection to the On-Premise server. default connect to Restores the connection to the Cloud based server. default host Restores the Hostname or IP address of ConsoleFlow. default local port Clears the local port for ConsoleFlow client. default mqtt local port Clears the local port for ConsoleFlow MQTT client. SGX™ 5150 IoT Device Gateway Command Reference 86