Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 224

port forwarding rule 7 config-portforwarding:7 level commands, target port

Get Lantronix SGX 5150 IoT Device Gateway PDF manuals and user guides View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals

Page 224 highlights

6: Commands and Levels no friendly name Remove the friendly name. no ingress ip address Clears the original WAN destination IP address for port forwarding rule. no ip address Clears the LAN destination IP address for port forwarding rule. no port or range Clears the WAN port or range for port forwarding rule. no target port Clears the LAN destination port for port forwarding rule. port forwarding rule Change to config gateway port forwarding level. port or range Sets the WAN port or range for port forwarding rule. = port or range. protocol both Sets the protocol to Both (TCP and UDP). protocol tcp Sets the protocol to TCP. protocol udp Sets the protocol to UDP. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. state disable Disables the port forwarding rule. state enable Enables the port forwarding rule. target port Sets the LAN destination port for port forwarding rule. = port. write Stores the current configuration in permanent memory. port forwarding rule 7 (config-portforwarding:7) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Both). exit Exits to the config-gateway level. friendly name Set the friendly name for port forwarding rule = friendly name ingress ip address Sets the original WAN destination IP address for port forwarding rule. ip address Sets the LAN destination IP address for port forwarding rule. no friendly name Remove the friendly name. no ingress ip address Clears the original WAN destination IP address for port forwarding rule. no ip address Clears the LAN destination IP address for port forwarding rule. no port or range Clears the WAN port or range for port forwarding rule. no target port Clears the LAN destination port for port forwarding rule. port forwarding rule Change to config gateway port forwarding level. port or range Sets the WAN port or range for port forwarding rule. = port or range. protocol both Sets the protocol to Both (TCP and UDP). protocol tcp Sets the protocol to TCP. protocol udp Sets the protocol to UDP. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. state disable Disables the port forwarding rule. state enable Enables the port forwarding rule. target port Sets the LAN destination port for port forwarding rule. = port. write Stores the current configuration in permanent memory. port forwarding rule 8 (config-portforwarding:8) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Both). exit Exits to the config-gateway level. friendly name Set the friendly name for port forwarding rule = friendly name ingress ip address Sets the original WAN destination IP address for port forwarding rule. ip address Sets the LAN destination IP address for port forwarding rule. no friendly name Remove the friendly name. no ingress ip address Clears the original WAN destination IP address for port forwarding rule. no ip address Clears the LAN destination IP address for port forwarding rule. no port or range Clears the WAN port or range for port forwarding rule. no target port Clears the LAN destination port for port forwarding rule. port forwarding rule Change to config gateway port forwarding level. SGX™ 5150 IoT Device Gateway Command Reference 224

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
6:
Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference
224
no friendly name
Remove the friendly name.
no ingress ip address
Clears the original WAN destination IP address for port forwarding rule.
no ip address
Clears the LAN destination IP address for port forwarding rule.
no port or range
Clears the WAN port or range for port forwarding rule.
no target port
Clears the LAN destination port for port forwarding rule.
port forwarding rule
<number>
Change to config gateway port forwarding level.
port or range
<text>
Sets the WAN port or range for port forwarding rule. <text> = port or range.
protocol both
Sets the protocol to Both (TCP and UDP).
protocol tcp
Sets the protocol to TCP.
protocol udp
Sets the protocol to UDP.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Disables the port forwarding rule.
state enable
Enables the port forwarding rule.
target port
<text>
Sets the LAN destination port for port forwarding rule. <text> = port.
write
Stores the current configuration in permanent memory.
port forwarding rule 7 (config-portforwarding:7) level commands
clrscrn
Clears the screen.
default protocol
Restores the default value of the protocol (Both).
exit
Exits to the config-gateway level.
friendly name
<text>
Set the friendly name for port forwarding rule <text> = friendly name
ingress ip address
<text>
Sets the original WAN destination IP address for port forwarding rule.
ip address
<text>
Sets the LAN destination IP address for port forwarding rule.
no friendly name
Remove the friendly name.
no ingress ip address
Clears the original WAN destination IP address for port forwarding rule.
no ip address
Clears the LAN destination IP address for port forwarding rule.
no port or range
Clears the WAN port or range for port forwarding rule.
no target port
Clears the LAN destination port for port forwarding rule.
port forwarding rule
<number>
Change to config gateway port forwarding level.
port or range
<text>
Sets the WAN port or range for port forwarding rule. <text> = port or range.
protocol both
Sets the protocol to Both (TCP and UDP).
protocol tcp
Sets the protocol to TCP.
protocol udp
Sets the protocol to UDP.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Disables the port forwarding rule.
state enable
Enables the port forwarding rule.
target port
<text>
Sets the LAN destination port for port forwarding rule. <text> = port.
write
Stores the current configuration in permanent memory.
port forwarding rule 8 (config-portforwarding:8) level commands
clrscrn
Clears the screen.
default protocol
Restores the default value of the protocol (Both).
exit
Exits to the config-gateway level.
friendly name
<text>
Set the friendly name for port forwarding rule <text> = friendly name
ingress ip address
<text>
Sets the original WAN destination IP address for port forwarding rule.
ip address
<text>
Sets the LAN destination IP address for port forwarding rule.
no friendly name
Remove the friendly name.
no ingress ip address
Clears the original WAN destination IP address for port forwarding rule.
no ip address
Clears the LAN destination IP address for port forwarding rule.
no port or range
Clears the WAN port or range for port forwarding rule.
no target port
Clears the LAN destination port for port forwarding rule.
port forwarding rule
<number>
Change to config gateway port forwarding level.