Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 157
filter 9 config-ethernet-qos-filter:eth0:9 level commands, ftp config-ftp level commands
View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
6: Commands and Levels show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. filter 9 (config-ethernet-qos-filter:eth0:9) level commands clrscrn Clears the screen. default priority Restores the default value of the priority (Excellent Effort). exit Exits to the next higher level. mac address Sets the filter MAC Address. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. network Sets the filter Network. no mac address Removes the filter MAC Address. no network Removes the filter Network. no ports Removes the filter Port. ports Sets the filter Port. priority background Sets the priority to Background. Bandwidth allocated is 5%-100%. priority best effort Sets the priority to Best Effort. Bandwidth allocated is 10%-100%. priority critical applications Sets the priority to Critical Applications. Bandwidth allocated is 15%-100%. priority excellent effort Sets the priority to Excellent Effort. Bandwidth allocated is 10%-100%. priority internetwork control Sets the priority to Internetwork Control. Bandwidth allocated is 5%-100%. priority network control Sets the priority to Network Control. Bandwidth allocated is 5%-100%. priority video Sets the priority to Video. Bandwidth allocated is 20%-100%. priority voice Sets the priority to Voice. Bandwidth allocated is 30%-100%. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. ftp (config-ftp) level commands clrscrn Clears the screen. data port Sets the FTP server data-port. default data port Restores the FTP server data-port to default: 20. default passive mode ports Clears the FTP server number of passive ports. default passive mode start port Clears the FTP server passive mode start port. default port Restores the FTP server port to default: 21. exit Returns to the config level. passive mode ports Sets the FTP server number of passive ports. passive mode start port Sets the FTP server passive mode start port. port Sets the FTP server port. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics Displays the FTP statistics. state disable Disables the FTP server. state enable Enables the FTP server. write Stores the current configuration in permanent memory. ftp put (config-action-ftp_put:wlan0 link state change) level commands clrscrn Clears the screen. connection Enters the next lower level. Specify the instance for the next lower level. default mode Sets default of simultaneous connection mode. exit Exits to the next higher level. mode sequential Sets sequential mode; will stop after first connection that goes through. mode simultaneous Sets simultaneous mode; will make all possible connections. no reminder interval Clears the FTP Put reminder interval. FTP Put is sent once only. SGX™ 5150 IoT Device Gateway Command Reference 157