Lantronix SGX 5150 IoT Device Gateway SGX 5150 Command Reference - Page 243

syslog config-syslog level commands, telnet config-cli-telnet level commands, severity log level error

Get Lantronix SGX 5150 IoT Device Gateway PDF manuals and user guides View all Lantronix SGX 5150 IoT Device Gateway manuals
Add to My Manuals
Save this manual to your list of manuals

Page 243 highlights

6: Commands and Levels exit Exits to the config-gateway level. friendly name Set the friendly name for static route. = friendly name gateway Sets the gateway for static route network. interface Sets the route interface = interface name metric Sets the metric for static route. = metric network Sets the IP address and network mask for static route network. no friendly name Remove the friendly name no gateway Clears the gateway for static route network. no interface Clears the route interface. The WAN interface is used if no interface is specified. no network Clears the IP address for static route network. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. state disable Disables the static route. state enable Enables the static route. static route Change to config gateway static route level. write Stores the current configuration in permanent memory. syslog (config-syslog) level commands clrscrn Clears the screen. default local port Clears the syslog local port. default remote port Restores the default syslog remote port. default severity log level Restores the default to no logging. exit Returns to the config level. host Sets the address of the syslog recipient. = IP address or name of the host. local port Sets the syslog local port. no host Removes the address of the syslog recipient. remote port Sets the syslog remote port. = number of the remote port used when making a syslog connection. severity log level alert Log only Alert and more severe events. severity log level critical Log only Critical and more severe events. severity log level debug Log all events. severity log level emergency Log only Emergency events. severity log level error Log only Error and more severe events. severity log level information Log only Information and more severe events. severity log level none No logging. severity log level notice Log only Notice and more severe events. severity log level warning Log only Warning and more severe events. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics Displays the syslog statistics. state disable Disables syslog logging. state enable Enables syslog logging. write Stores the current configuration in permanent memory. telnet (config-cli-telnet) level commands authentication disable No password required for Telnet users. authentication enable Challenges the Telnet user with a password. clrscrn Clears the screen. default max sessions Restores the default maximum allowed concurrent incoming Telnet sessions. default port Restores the default local port to the Telnet server. exit Exits to the CLI level. max sessions Sets the maximum allowed concurrent incoming Telnet sessions. = number of sessions. port Sets the local port that the Telnet server uses. = local port number. SGX™ 5150 IoT Device Gateway Command Reference 243

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
6:
Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference
243
exit
Exits to the config-gateway level.
friendly name
<text>
Set the friendly name for static route. <text> = friendly name
gateway
<text>
Sets the gateway for static route network.
interface
<text>
Sets the route interface <text> = interface name
metric
<number>
Sets the metric for static route. <number> = metric
network
<text>
Sets the IP address and network mask for static route network.
no friendly name
Remove the friendly name
no gateway
Clears the gateway for static route network.
no interface
Clears the route interface. The WAN interface is used if no interface is specified.
no network
Clears the IP address for static route network.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Disables the static route.
state enable
Enables the static route.
static route
<number>
Change to config gateway static route level.
write
Stores the current configuration in permanent memory.
syslog (config-syslog) level commands
clrscrn
Clears the screen.
default local port
Clears the syslog local port.
default remote port
Restores the default syslog remote port.
default severity log level
Restores the default to no logging.
exit
Returns to the config level.
host
<text>
Sets the address of the syslog recipient. <text> = IP address or name of the host.
local port
<number>
Sets the syslog local port.
no host
Removes the address of the syslog recipient.
remote port
<number>
Sets the syslog remote port. <number> = number of the remote port used when
making a syslog connection.
severity log level alert
Log only Alert and more severe events.
severity log level critical
Log only Critical and more severe events.
severity log level debug
Log all events.
severity log level emergency
Log only Emergency events.
severity log level error
Log only Error and more severe events.
severity log level information
Log only Information and more severe events.
severity log level none
No logging.
severity log level notice
Log only Notice and more severe events.
severity log level warning
Log only Warning and more severe events.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
show statistics
Displays the syslog statistics.
state disable
Disables syslog logging.
state enable
Enables syslog logging.
write
Stores the current configuration in permanent memory.
telnet (config-cli-telnet) level commands
authentication disable
No password required for Telnet users.
authentication enable
Challenges the Telnet user with a password.
clrscrn
Clears the screen.
default max sessions
Restores the default maximum allowed concurrent incoming Telnet sessions.
default port
Restores the default local port to the Telnet server.
exit
Exits to the CLI level.
max sessions
<number>
Sets the maximum allowed concurrent incoming Telnet sessions. <number> =
number of sessions.
port
<number>
Sets the local port that the Telnet server uses. <number> = local port number.