Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 96
Setting NFC, Configuring the Connection by Using Push Button
View all Kyocera ECOSYS M4125idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Installing and Setting up the Machine > Network settings 5 Note the network name (SSID), IP address, and password. 6 Configure the handheld device. • [Settings] > [Wi-Fi] • Select the network name (SSID) appeared in step 5 from the list. • Enter the password that was provided in step 5 > [Connect] • The network between this machine and the computer or handheld device is configured. Configuring the Connection by Using Push Button When your computer or handheld device does not support Wi-Fi Direct but supports WPS, you can configure the network using push button. 1 Display the screen. [System Menu/Counter] key > [System/Network] > Enter a login user name and password > [Login] > [Network] > [Wi-Fi Direct Settings] > [Wi-Fi Direct] 2 Configure the settings. [On] > [OK] 3 Restart the network. [System Menu / Counter] key > [System/Network] > [Network] > [Restart Network] 4 [Home] > [Wi-Fi Direct] 5 Press the push button on the computer or handheld device and select [Push Button] on the screen of operation panel simultaneously. The network between this machine and the computer or handheld device is configured. IMPORTANT You can connect up to three handheld devices at the same time using Wi-Fi Direct setting. When the devices that support Wi-Fi Direct are connected, if you want to connect other device, disconnect the already-connected devices from the network. The disconnection methods are as follows: • Disconnect the network from the computer or handheld computer • Disconnecting all devices from the network on the operation panel Select [Home] > [Wi-Fi Direct] > [Connected Device List] > [Disconnect All] • Configuring auto disconnecting time from the System menu [Wi-Fi Direct Settings] (8-32) • Configuring auto disconnecting time from the Command Center RX Command Center RX User Guide Setting NFC NFC (Near Field Communication) is an international standard for near radio communication that is limited to a data communication distance of 10 cm. Data communication can be performed by simply holding an NFC capable portable terminal near the machine. The configuration methods are as follows Configuring Settings Using a Web Page Settings can be configured from Command Center RX. Command Center RX User Guide 2-20