Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 440

Troubleshooting > General Troubles Domain_name\user_name (for example, abcdnet\james.smith) User_name@domain_name (for example, james.smith@abcdnet) Printed Image Trouble Image trouble is indicated by the symptoms in the table below. Implement appropriate procedures. Symptom Checkpoints Corrective Actions Reference Page The overall image is too light. Is the paper damp? Replace the paper with new paper. 3-17 If the problem occurs frequently, turn 2-5 on the Cassette Heater switch. Have you changed the density? Select appropriate density level. 6-16 8-59 Is the toner distributed evenly within Shake the toner container from side 10-4 the toner container? to side several times. Is EcoPrint mode enabled? Change the [EcoPrint] setting to [Off]. 6-18 ― Run [Drum Refresh]. 11-26 ― Make sure the paper type setting is 8-9 correct for the paper being used. The white parts of the Have you changed the density? Select appropriate density level. 6-16 image seem to have a 8-59 grayish cast. Copies have a moire Is the original a printed photograph? Change the [Original Image (Copy)] 6-17 pattern (dots grouped or [Original Image (Send/Store)] together in patterns setting to [Photo]. and not aligned uniformly). Texts are not clearly printed. Did you choose appropriate image quality for the original? Change [Original Image (Copy)] or 6-17 [Original Image (Send/Store)] to the appropriate setting. 11-6