Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 208

Operation on the Machine > Connecting cable Loading Originals in the Document Processor The document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are scanned. Originals Supported by the Document Processor Weight 45 to 160 g/m2 (duplex: 50 to 120 g/m2) Sizes No. of sheets Maximum A3/Ledger (297 x 432 mm) (Long-sized 297 x 1,900 mm) to Minimum A5-R/ Statement-R (140 x 182 mm) Plain paper (80 g/m2), Color paper, Recycled paper, High Quality paper: 50 sheets Do not use the document processor for the following types of originals. Otherwise, the originals may be jammed or the document processor may become dirty. • Document Processor Originals Not Supported by the Document Processor Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before loading. Failure to do so may cause the originals to jam.) • Originals with adhesive tape or glue • Originals with cut-out sections • Curled original • Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam.) • Carbon paper • Crumpled paper IMPORTANT • Before loading originals, be sure that there are no originals left on the original eject table. Originals left on the original eject table may cause the new originals to jam. • Do not make an impact on the document processor top cover, such as aligning the originals on the top cover. It may cause an error in the document processor. 1 Adjust the original width guides. 5-5