Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 367

System Menu > [System/Network] [Wireless Network] Configure settings for the optional Wireless Network Interface Kit. NOTE This function is displayed when the optional Wireless Network Interface Kit (IB-51) is installed. Item Connection Status Quick Setup Wizard Available Network Push Button Description When the optional is installed, you can check the wireless LAN status. If the machine will connect to an access point that supports the automatic wireless network setup, connection settings can be configured by Quick Setup. Displays access points to which the machine can connect. Select a desired access point from the list. If the access point supports the push button method, wireless settings can be configured using the push button. This setting executes push button, and the connection is started by pressing the push button on the access point. PIN Code Method (Device) PIN Code Method (Terminal) Custom Setup Network Name (SSID) NOTE The push button method supports only the WPS. Starts connection using the machine's PIN code. Enter the PIN code into the access point. The PIN code of the machine is automatically generated. Starts connection using the PIN code of the access point. Enter the PIN code of the access point. The detailed settings for wireless LAN can be changed. Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects. Connection Mode NOTE An SSID can contain up to 32 characters. Set the connection mode. Value: Ad Hoc, Infrastructure Channel Network Authentication Encrypt NOTE • Ad Hoc: Directly communicates with the device without going through an access point. This method cannot be used to connect to two or more devices. • Infrastructure: Performs communication through an access point. Set channel. Use [-] / [+] or the numeric keys to enter a number. Value: 1 to 11 Select network authentication type. To select other options, open the device home page from a computer. Value: Open System, Shared Key, WPA-PSK*1, WPA2-PSK*1 Select encryption method. If the option other than [Disable] is selected, enter the WEP key or the Preshared key. The setting values vary depending on the Network Authentication setting. Select [Data Encryption]. When Network Authentication is set to [Open] or [Shared] Value: Disable, WEP When Network Authentication is set to [WPA-PSK] or [WPA2-PSK] Value: TKIP*2, AES, Auto*2, Pre-shared Key NOTE • If [WEP] is selected, enter the WEP key. A WEP key can contain up to 26 characters. • If [TKIP], [AES] or [Auto] is selected, enter the Preshared key. Enter the value in 8 to 64 characters. *1 Not displayed if [Ad Hoc] is selected for [Connection Mode]. *2 Not displayed if [WPA2-PSK] was selected for [Network Authentication]. 8-49