Home » Epson Manuals » Label Makers » Epson ColorWorks C7500 » Manual Viewer

Epson ColorWorks C7500 ESC/label Command Reference Guide - Page 214

Appendix A, List of Printer Operation Modes

View all Epson ColorWorks C7500 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 214 highlights

Appendix A: List of Printer Operation Modes A printer operation mode is information that determines the operation of the printer. The list of printer operation modes is shown in Table A-1. Use the "^S(C" (Set printer operation mode) command and the "~H(C" (Send printer operation mode) command to set and request the printer operation mode values. When using these commands, specify < Function identifier > and as the command parameter. Printer operation mode values are volatile, and return to their initial values when the printer is turned off or reset. Use the "^JU" (save/load setting value) command to change the initial values in printer operation mode.  Use the "^S(C" command to set printer operation mode values.  Use the "~H(C" command to get printer operation mode values.  Use the "^JU" command to change the initial values in printer operation mode. In Table A-1, the printer operation mode whose definition range may vary depending on the model is checked at the column of "Model dependence for definition range". The printer operation mode whose function may not be supported depending on the model is checked at the column of "Model dependence for function support". The factory-set initial values for each setting in printer operation mode depend on the printer model. Refer to the attached Command List also for details regarding model dependence. ESC/Label Command Reference Guide Rev. E Page 214

Section	Page
ESC/Label Command Reference Guide	1
Cautions	2
Trademarks	2
About this Document	3
TABLE OF CONTENTS	4
1. Commands Outline	8
1.1. Characteristics	8
1.2. Structure	9
1.3. Command Basic Specifications	10
1.3.1 Format Commands and Control Commands	10
1.3.2 Basic Data Format for the Command	10
1.3.3 Command Syntax	12
1.3.4 About Saving the Graphics and Label Formats in the Printer	12
1.4. Example of Command Use	13
1.4.1 Basic Label Printing	13
1.4.2 Color Label Printing	14
1.4.3 Serialized Printing	15
1.4.4 Saving a File for a Label Format	16
1.4.5 Printing Using the Label Format File	17
1.4.6 Getting Status	18
2. Primary Functions	19
2.1. Fonts	19
2.1.1 Font type	20
2.1.2 Special symbols	21
2.2. Media settings	21
2.2.1 Media coating type	21
2.2.2 Media form	22
2.2.3 Label edge detection	22
2.2.4 Media source	22
2.2.5 Media shape	22
2.3. Errors	23
2.4. Print area	24
2.4.1 Leading edge and direction definitions	25
2.4.2 Reference position definitions	26
2.4.3 Maximum printable area	27
2.4.4 Printable area and mount settings	28
2.4.5 Print area and margin settings	29
2.4.6 Print requests outside the print area	30
2.4.7 Print area settings using ZPL II commands	31
2.5. Getting and Setting Printer Information	32
2.5.1 Method for Setting Printer Information	33
2.5.2 Method for Getting Printer Information	34
2.6. Designating Color	36
2.7. Field color reversal	38
2.8. Printing Graphics	40
2.8.1 Registering a Graphic in a Printer and Printing It	40
2.8.2 Embedding a Graphic in the Field and Printing It	41
3. Detailed Command Specifications	42
^A	43
^A@	44
^B(Q	45
^B(R	48
^B(V	50
^B0 ^BO	51
^B2	53
^B3	54
^B7	55
^B8	57
^B9	58
^BA	60
^BC	63
^BD	68
^BE	70
^BF	71
^BK	73
^BQ	74
^BR	78
^BU	80
^BX	81
^BY	85
^C(D	86
^C(L	87
^C(S	88
^CC ~CC	89
^CD ~CD	90
^CF	91
^CI	92
^CM	94
^CT ~CT	95
^CV	96
^CW	97
~DE	98
^DF	99
~DG	100
~DN	102
~DU	103
~DY	104
^F(C	107
^FB	109
^FC	110
^FD	111
^FH	112
^FM	113
^FN	114
^FO	115
^FP	117
^FR	118
^FS	119
^FT	120
^FV	123
^FW	124
^FX	126
^GB	127
^GC	128
^GD	129
^GE	130
^GF	131
^GS	133
~H(C	134
^H(E	136
~H(I	137
~H(Q	139
~H(S	142
~H(Y	144
^HF	146
^HG	147
^HH	148
~HI	149
~HM	150
~HS	151
^HW	153
^HY	155
^ID	156
^IL	157
^IM	158
^IS	159
~J(C	160
~J(M	161
~JA	162
^JB	163
~JC	164
^JM	165
~JP	166
~JR	167
~JS	168
^JU	169
~JX	170
^JZ	171
^KL	172
^LH	173
^LR	174
^LS	175
^LT	176
^MC	177
^MF	178
^MM	179
^MN	180
^MP	181
^MU	182
^P(M	184
^PH	185
~PH	186
^PM	187
^PO	188
^PP	191
~PP	192
^PQ	193
~PS	194
~RO	195
^S(C	196
^SE	197
^SF	198
^SL	199
^SN	200
^SO	201
^ST	202
~TA	203
^TB	204
^TO	205
~W(P	206
~WC	207
^WD	208
^XA	209
^XB	210
^XF	211
^XG	212
^XZ	213
Appendix A: List of Printer Operation Modes	214
Appendix B: List of Printer Operation Statuses	227
Appendix C: List of Printer Information	232
REVISION SHEET (Summary)	233

Match case Limit results 1 per page

ESC/Label Command Reference Guide

Rev. E

Page 214

Appendix A:

List of Printer Operation Modes

A printer operation mode is information that determines the operation of the printer.

The list of

printer operation modes is shown in Table A-1.

Use the "^S(C" (Set printer operation mode) command

and the "~H(C" (Send printer operation mode) command to set and request the printer operation mode

values.

When using these commands, specify < Function identifier > and <Object identifier> as the

command parameter.

Printer operation mode values are volatile, and return to their initial values when the printer is turned off

or reset.

Use the "^JU" (save/load setting value) command to change the initial values in printer

operation mode.



Use the "^S(C" command to set printer operation mode values.



Use the "~H(C" command to get printer operation mode values.



Use the "^JU" command to change the initial values in printer operation mode.

In Table A-1, the printer operation mode whose definition range may vary depending on the model is

checked at the column of "Model dependence for definition range".

The printer operation mode whose

function may not be supported depending on the model is checked at the column of "Model dependence

for function support".

The factory-set initial values for each setting in printer operation mode depend on the printer model.

Refer to the attached Command List also for details regarding model dependence.