Epson ColorWorks C7500 ESC/label Command Reference Guide - Page 179
ESC/Label Command Reference Guide, Rev. E,
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
^MM [Name] Set print mode [Format] ^MM m Parameters Description Range m Print mode m = T/P/R/A/C T: No cutting P: Manual peeling and application R: Rewind A: Automatic peeling and application C: Cutting performed [Function] Sets the printer operation for when printing is completed. The print mode is set based on Parameter m. The print mode determines the printer operations from the printing of one label to the printing of the next label. Print mode Operation after label printing Operation by the next label command No cutting Feeds the label to the manual cut position. Backfeeds the next label to the home position, then performs printing. Manual peeling and Feeds the label to the manual peeling Backfeeds the next label to the application and application position. home position, then performs printing. Rewind Stops paper feeding at the position Prints the next label from the where printing ends. position where printing ended. Automatic peeling Feeds the label to the automatic and application peeling and application position. Backfeeds the next label to the home position, then performs printing. Cutting performed Feeds the label to the autocutter position and cuts the media. Backfeeds the next label to the home position after cutting. Backfeeds the next label to the home position, then performs printing. Supported modes vary depending on the model. [Response] None [Reference] Related commands: None [Note] The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage example] An example of sending data that sets the print mode and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^MMC 1. Sets the print mode to . ^JUS 2. Saves the setting to non-volatile memory. ^XZ ESC/Label Command Reference Guide Rev. E Page 179