Epson ColorWorks C7500 ESC/label Command Reference Guide
Epson ColorWorks C7500 Manual
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ColorWorks C7500 manual content summary:
- Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 1
Command Reference Guide M00097704 Rev. E - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 2
comply with Seiko Epson Corporation's operating and maintenance instructions. 6. Seiko Epson Corporation shall not be liable against any damages or problems arising from purpose only. ©Seiko Epson Corporation 2016-2019. All rights reserved. ESC/Label Command Reference Guide Rev. E Page 2 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 3
This document describes ESC/Label commands. ESC/Label commands are used to control Epson's label printers. This document is designed for those who use ESC/Label commands to develop programs to control printers. Please refer to the ESC/Label Application Development Guide when developing programs - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 4
Printing Graphics...40 2.8.1 Registering a Graphic in a Printer and Printing It 40 2.8.2 Embedding a Graphic in the Field and Printing It 41 3. Detailed Command Specifications ...42 ^A...43 ^A@ ...44 ^B(Q...45 ^B(R ...48 ^B(V ...50 ^B0 ^BO...51 ESC/Label Command Reference Guide Rev. E Page 4 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 5
^FM...113 ^FN ...114 ^FO ...115 ^FP...117 ^FR ...118 ^FS ...119 ^FT ...120 ^FV...123 ^FW ...124 ^FX...126 ^GB ...127 ^GC ...128 ESC/Label Command Reference Guide Rev. E Page 5 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 6
^MC ...177 ^MF...178 ^MM ...179 ^MN ...180 ^MP ...181 ^MU ...182 ^PH ...184 ~PH ...186 ^PM ...187 ^PO ...188 ^PP...191 ~PP...192 ESC/Label Command Reference Guide Rev. E Page 6 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 7
210 ^XF...211 ^XG ...212 ^XZ ...213 Appendix A: List of Printer Operation Modes ...214 Appendix B: List of Printer Operation Statuses ...227 Appendix C: List of Printer Information ...232 REVISION SHEET (Summary) ...233 REVISION SHEET (Detail) ...234 ESC/Label Command Reference Guide Rev. E Page 7 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 8
to control the printer. (6) Because you can save the graphic and label format in the printer, you can print labels with a small amount of transmitted data. (7) You can get the printer operation status or the printer operation mode whenever you like. ESC/Label Command Reference Guide Rev. E Page - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 9
label printer market. (2) Epson's original commands and parameter expansions are included to realize color label printing on an inkjet printer. ESC/label command ZPL II ZPL II Commands necessary for label printing and inkjet printer control *Epson ESC/Label Command Reference Guide Rev. E Page 9 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 10
priority. Format commands are used for defining and printing labels, and control commands are used for controlling the printer. Format commands and control commands have their own fixed of parameters a command can have depends on the command type. ESC/Label Command Reference Guide Rev. E Page 10 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 11
are input following one another and the parameters are omitted, the printer will assume default parameters are being designated. Whether there are default command printer assumes the character string up until the maximum character string length was designated. ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 12
. The printer has a non-volatile saving device, such as Flash ROM, and a volatile saving device, such as RAM, and different drive letters are allocated for each device. Files are designated as " colon dot ". ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 13
Command The printer operates as follows. In (2), the character string "ABC" is rendered in the rendering area. In (3), the character string "12345" is rendered in the rendering area as a barcode. In (4), the contents of the rendering area are printed. ESC/Label Command Reference Guide Rev. E Page - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 14
Label The printer operates as follows. In (2), the character string "ABC" is rendered in red in the rendering area. In (3), the character string "12345" is rendered in the rendering area as a barcode. In (4), the contents of the rendering area are printed. ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 15
section in sequence, and designate the number of copies to print. Command (1) "^XA"(Begin label format) Printer Ex: ABC in the field data setting (2) "^FO" (Field position setting) "^A"(Font , ... 010 is printed on the sequence of 10 copies. ESC/Label Command Reference Guide Rev. E Page 15 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 16
. In (2), the host orders the printer to save the label format with the designated file name. In (5), the command group written between "^XA"(Begin label format) and "^XZ"(End label format) is saved in the memory area of the printer as "SAMPLE.FMT". ESC/Label Command Reference Guide Rev. E Page 16 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 17
will be the difference and perform printing. Command (1) "^XA"(Begin label format) Ex: Call "SAMPLE.FMT" Printer (2) "^XF"(Call label format) Load the contents of SAMPLE.FMT Ex: 001 for the (4), the contents of the rendering area are printed. ESC/Label Command Reference Guide Rev. E Page 17 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 18
. Command Printer (1) "~HS"(Status request) Status request Status response Figure 1.4.6 Example of a Command to request the Status The printer operates as follows. In (1), the printer receives the "~HS"(Status request), and returns the status to the host. ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 19
multiples, and scalable fonts, for which the character width and height can be specified separately in units of [dots]. The fonts included in the printer are both fixed-size fonts and scalable fonts. However, only scalable fonts can be downloaded. ESC/Label Command Reference Guide Rev. E Page 19 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 20
serif 59 × 53 No Font "V" Sans serif 80 × 71 No Font "0"*2 Sans serif 15 × 12 (Default) Yes *1 Font "C" and "D" are the same font. *2 Zero ESC/Label Command Reference Guide Rev. E Character image Page 20 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 21
43h 44h 45h Media settings Media settings instruct the printer about the type and form of media to be used for printing. The printer performs printing control and media control based paper ^S(CLM,T,PG* "*" in the command format indicates a figure. ESC/Label Command Reference Guide Rev. E Page 21 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 22
attached at the leading edge of the label is detected. The gap between labels is detected. Printer does not detect the leading edge of the label. Command format ^S(CLM,D,M ^S(CLM,D,W ^S( shape. Paper folded Command format ^S(CLM,S,RP ^S(CLM,S,FP ESC/Label Command Reference Guide Rev. E Page 22 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 23
for printer mechanisms, such as print requests, cannot be executed. Indicators (LEDs/LCDs) indicate errors. "~H(SMA,S"(Send printer operation status ): ER (error status) is returned. "~H(SEA,E"(Send error status): the cause of the error is returned. ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 24
full sheet of paper where the printer will print. Print area is a logical rectangular area in the printer, corresponding to one logical label on a sheet of paper. The print area are shown in Figure 2.4.1. Printer Home position Mount (gap) Label Paper Maximum printable area Printable area Print - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 25
are shown in Figure 2.4.2. X direction Paper Feed direction Y direction Top direction Left direction Right direction Bottom direction Leading edge Figure 2.4.2 Leading Edge and Directions ESC/Label Command Reference Guide Rev. E Page 25 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 26
printer is arranged on a physical sheet of paper, the 1st dot position on the left edge of the paper and the leading edge position of the label Position of Labels The leading edge position of a label can be the Leading Edge Position Adjustment for Labels Setting item Setting command format Leading - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 27
label as references. The width of the maximum printable area is the maximum media width of the printer. label. Maximum printable area Maximum paper length Maximum media width 1st dot position Leading edge position of label Figure 2.4.4 Maximum printable area ESC/Label Command Reference Guide - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 28
are set according to the actual paper printed on by the printer. Table 2.4.3 Mount Settings Direction Setting items Setting command format X direction Left gap ^S(CLS,G,c ¹ Label width ^S(CLS,P,c ¹ Y direction Label length ^S(CLS,L,c ¹ ¹ The unit of the setting value can be selected - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 29
the printable area, the area minus margins is defined as the print area. in the printer according to printer and paper specifications. If all margins are set to 0, the printable area and print margin Figure 2.4.6 Printable Area and Mount Settings ESC/Label Command Reference Guide Rev. E Page 29 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 30
the print area The user prints text and graphics within the print area set in the printer, with the home position as the starting point. If you attempt to print text or Print area CDE Figure 2.4.7 Example of Printing Outside the Print Area ESC/Label Command Reference Guide Rev. E Page 30 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 31
label Sets the label width Label width + left gap (mount) Paper Next label Maximum printable area Printable area Left gap Label width Adjustment of leading edge position of label (^LT) Label sum of the left gap (mount) and label width. When the label width is specified with ^PW, the left - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 32
that indicates the printer unit / Printer name information characteristics Serial number Section 2.5.1 describes the method for setting the printer information, and section 2.5.2 describes the method for getting the printer information. ESC/Label Command Reference Guide Rev. E Page 32 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 33
Sample of printer information setting command Format Setting value format Definition range ^S(CLR,P,v Fixed character string 300: Resolution 300 [dpi] 600: Resolution 600 [dpi] ^S(CLS,P,v Numeral value Minimum: 1, Maximum: Value depend on the model ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 34
returns the response data based on the printer information request command. The response data is equal to the setting command that corresponds to the request command, and will take the command code , format. ESC/Label Command Reference Guide Rev. E Page 34 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 35
CLR,P Example of response data from the printer: ->^S(CLR,P,600 printer error status is shown below. ~H(SEA,E Example of response data from the printer: ->^S(SEA,E,NE Request to send current error status. Currently no error. ESC/Label Command Reference Guide - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 36
you can designate the color of text or diagram and print labels. Color can be designated for the following applicable renderings. (Transparent) Label media: white Please refer to the product specification of the printer for a detailed guarantee condition. ESC/Label Command Reference Guide Rev. E - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 37
command is a format command and can be used in the field, like mentioned above in section 1.4.2 Color Label Printing ^F(C r1, g1, b1, a1, i1, r2, g2, b2, a2, i2 Field Color Designation Arrange "0123456" as black characters (No color designated.) ESC/Label Command Reference Guide Rev. E Page 37 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 38
is composed by the RGB color model of 256 scale. The above expression shows the calculation of each composition color (red, green, and blue). ESC/Label Command Reference Guide Rev. E Page 38 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 39
" ^FO10,180^FB800,2^ACN,60,20 Third field ^FDReverse Foreground & Background^FS (No color and reversal setting) Figure 2.7.1 Examples of Text Field Color Reversal ESC/Label Command Reference Guide Rev. E Page 39 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 40
Epson color label command, use either of the following procedures to print. Register the graphic in the printer 4. Delete the files from the printer. When registering a color graphic, label print is aborted by the cancel button operation in the printer to the printer or executed by the printer. If - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 41
2.8.2 Embedding a Graphic in the Field and Printing It In the label format, use the ^GF command to define the graphic and print it. ^GF - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 42
period of the setting value is started. [Response] Description of response sent from the printer, format, and the parameters that configure the response. [Reference] Specifications that should be [Usage example]Examples of the use of the command. ESC/Label Command Reference Guide Rev. E Page 42 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 43
specified font type is a fixed-size font, set a multiple of the font type's standard width for Parameter w. [Response] None [Reference] Related commands: ^FW ,^CF ESC/Label Command Reference Guide Rev. E Page 43 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 44
identifier as the font used in rendering field character strings. Sets the field orientation based on Parameter o. [Response] None [Reference] Related commands: ^FW ,^CF ESC/Label Command Reference Guide Rev. E Page 44 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 45
specifies input mode. Automatically sets the character mode based on the field data. M Manually specifies input mode. Can specify the character mode based on the meta characters. N, are input after B in the character string to encode. ESC/Label Command Reference Guide Rev. E Page 45 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 46
to be encoded Range Q, M, or L Fixed as A Character string Format when manual is specified for the character mode input , - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 47
encoded Character string Format when mixed mode is specified for the encode mode and manual for the input mode , - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 48
specifying particular characters in the data. The method for specifying attributes for encoding is the same for both this command and "^BR"(GS1 DataBar). ESC/Label Command Reference Guide Rev. E Page 48 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 49
[Initial value] None [Response] None [Reference] Related function specifications: Related commands: None None ESC/Label Command Reference Guide Rev. E Page 49 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 50
partially or completely outside the print area Bar code outside print area [Initial value] N [Response] None [Reference] Related function specifications: None Related commands: None ESC/Label Command Reference Guide Rev. E Page 50 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 51
symbols for 1 ≤ n ≤ 26 structured append with Aztec Code id Aztec Code message ID ASCII code within 24 characters *1 Numeral "0" (zero) *2 Letter "O" of the alphabet ESC/Label Command Reference Guide Rev. E Page 51 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 52
via structured append based on Parameter n. Sets the message ID for the structured append based on Parameter id. [Response] None [Reference] Related commands: ^FW ESC/Label Command Reference Guide Rev. E Page 52 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 53
that fits in the label width will be printed. If the number of characters in the specified character string is odd, a zero is added to the front of the character string to make it even. [Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev. E Page 53 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 54
be encoded. If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. The check digit is added automatically. The check Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev. E Page 54 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 55
B: 270° rotation (clockwise) PDF417 row height [dot] 1 ≤ h ≤ Label length (Varies depending on the model) PDF417 error correction level 0 ≤ e ≤ r ≤ 90 Truncate right row indicators and t = Y/N stop pattern for PDF417 Y: Set N: Cancel ESC/Label Command Reference Guide Rev. E Page 55 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 56
the "^FM" command. [Encoding] 1850 characters of text and 1108 bytes of binary data can be encoded. [Response] None [Reference] Related commands: ^FW , ^FM ESC/Label Command Reference Guide Rev. E Page 56 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 57
be encoded. The check digit is added automatically. The check digit is calculated by modulus 10 / 3 weight. [Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev. E Page 57 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 58
added HRI characters on the top or on the bottom of the barcode based on Parameter a. Sets the check digit printing based on Parameter c. ESC/Label Command Reference Guide Rev. E Page 58 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 59
d10 d11 2 4 d2 d3 d4 d10 d11 3 5 d2 d3 d4 d5 d11 4 6 d2 d3 d4 d5 d6 d11 None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev. E Page 59 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 60
be encoded. If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. The check digit is added automatically. The check data using a combination of shift codes and characters. ESC/Label Command Reference Guide Rev. E Page 60 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 61
7 7 24 CAN &X 56 8 8 25 EM &Y 57 9 9 26 SUB &Z 58 : (Z 27 ESC 'A 59 ; 'F 28 FS 'B 60 < 'G 29 GS 'C 61 = 'H 30 RS 'D 62 > 'I 31 US 'E 63 ? 'J ESC/Label Command Reference Guide Rev. E Page 61 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 62
113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 ASCII character ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~ DEL Code 93 'W )A )B )C )D )E )F )G )H )I )J )K )L )M )N )O )P )Q )R )S )T )U )V )W )X )Y )Z 'P 'Q 'R 'S 'T ESC/Label Command Reference Guide Rev. E Page 62 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 63
based on Parameter c. The check digit calculated by modulus 103 is automatically added regardless of this setting. Sets the barcode mode based on Parameter m. ESC/Label Command Reference Guide Rev. E Page 63 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 64
If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. Designated encoding is performed based on >: 104 START B >; 105 START C >< 62 ^ ^ 62 >= 94 RS ~ 94 ESC/Label Command Reference Guide Rev. E Page 64 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 65
32 @ @ 32 33 A A 33 34 B B 34 35 C C 35 36 D D 36 37 E E 37 38 F F 38 39 G G 39 40 H H 40 41 I I 41 42 J J 42 43 K K 43 ESC/Label Command Reference Guide Rev. E Page 65 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 66
CR m 77 SO n 78 SI o 79 DLE p 80 DC1 q 81 DC2 r 82 DC3 s 83 DC4 t 84 NAK u 85 SYN v 86 ETB w 87 CAN x 88 ESC/Label Command Reference Guide Rev. E Page 66 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 67
Subset B y z { | } ~ DEL FNC3 FNC2 SHIFT CODE C FNC4 CODE A FNC1 Subset C 89 90 91 92 93 94 95 96 97 98 99 CODE B CODE A FNC1 ESC/Label Command Reference Guide Rev. E Page 67 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 68
of this symbol in the set of structured append symbols based on Parameter n. Sets the total number of structured append symbols based on Parameter q. ESC/Label Command Reference Guide Rev. E Page 68 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 69
in encoding when Parameter m = 2 or 3. When m = 2 Information type Service class code ISO3166 country code Postal code Extended postal code When m = 3 3 specified field data is encoded. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 69 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 70
automatically during encoding for the specified field data. digit is calculated by modulus 10 / 3 weight. The check [Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev. E Page 70 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 71
0 ≤ m ≤ 33 [Function] Sets the Micro PDF417 symbol to the field. Sets the field orientation based on Parameter o. Sets the symbol height based on Parameter h. ESC/Label Command Reference Guide Rev. E Page 71 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 72
250 366 33 4 4 50 8 14 20 You can set the structured append using the "^FM" command. [Response] None [Reference] Related commands: ^FM, ^FW, ^BY ESC/Label Command Reference Guide Rev. E Page 72 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 73
hyphens , colons , periods , dollar symbols , slashes , and plus symbols ) can be encoded. If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. [Response] None [Reference] Related commands: ^FW, ^BY ESC - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 74
. Sets the field orientation based on Parameter o. Sets the symbol model based on Parameter m. Sets the module size for symbol rendering based on Parameter s. ESC/Label Command Reference Guide Rev. E Page 74 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 75
specifies Automatically sets the character mode based on the input mode. input data. M Manually specifies input Specifies the character mode based on the meta mode. characters N, A, are input after B in the character string to encode. ESC/Label Command Reference Guide Rev. E Page 75 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 76
be encoded Character string Format in mixed mode when the input mode is manual ,,< A Character string to be encoded Character string ESC/Label Command Reference Guide Rev. E Page 76 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 77
Format in standard mode when the input mode is manual ,,... of combinations is 200. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 77 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 78
-8 11: UCC/EAN-128 and CC-A/CC-B 12: UCC/EAN-128 and CC-C 1 ≤ m ≤ 99 1 ≤ s ≤ 2 1 ≤ h ≤ 32000 (Varies depending on the model) 2 ≤ n ≤ 22, even numbers only ESC/Label Command Reference Guide Rev. E Page 78 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 79
bar is encoded as barcode data, and data after the vertical bar is encoded as 2-dimensional symbol data. [Response] None [Reference] Related commands: ^FW ESC/Label Command Reference Guide Rev. E Page 79 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 80
/ 3 weight. The first character is treated as the number system character when encoding the specified field data. [Response] None [Reference] Related commands: ^FW, ^BY ESC/Label Command Reference Guide Rev. E Page 80 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 81
based on Parameter o. Sets the size of each module comprising the symbol based on Parameter s. Sets the symbol's error correction level based on Parameter e. ESC/Label Command Reference Guide Rev. E Page 81 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 82
45 × 45 45 × 45 47 × 47 47 × 47 47 × 47 47 × 47 47 × 47 49 × 49 49 × 49 49 × 49 49 × 49 49 × 49 ESC/Label Command Reference Guide Rev. E Page 82 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 83
specifications for Parameters c and r. If only one is specified, the specified value is set. If different values are specified, the larger value is set. ESC/Label Command Reference Guide Rev. E Page 83 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 84
If 200 is specified for Parameter e, the setting for Parameter d does not affect the printer's operation. Sets the escape sequence identifier based on Parameter i. This is enabled only when 200 Response] None [Reference] Related commands: ^FW, ^BY ESC/Label Command Reference Guide Rev. E Page 84 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 85
width of the barcode, the ratio in width of the thick and thin bars, and the barcode height. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 85 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 86
't use this command together with ^IS command and N setting of ^MC command. [Initial value] None [Response] None [Reference] Related function specifications: Related commands: None ^C(L, ^C(S ESC/Label Command Reference Guide Rev. E Page 86 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 87
't use this command together with ^IS command and N setting of ^MC command. [Initial value] None [Response] None [Reference] Related function specifications: Related commands: None ^C(D, ^C(S ESC/Label Command Reference Guide Rev. E Page 87 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 88
't use this command together with ^IS command and N setting of ^MC command. [Initial value] None [Response] None [Reference] Related function specifications: None Related commands: ^C(D, ^C(L ESC/Label Command Reference Guide Rev. E Page 88 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 89
The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage example] An the format command and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^CC@ 1. Sets as the - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 90
The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage example] parameter delimiter and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^CDa 1. Sets as the - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 91
for Parameter h. If the specified font is a fixed-size font, set a multiple of the font's standard width for Parameter w. [Response] None [Reference] Related commands: ^A, ^A@ ESC/Label Command Reference Guide Rev. E Page 91 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 92
encoding 26: Multi-byte Asia encoding (ASCII transparent) 28: Unicode (UTF-8) 29: Unicode (UTF-16 Big-Endian) 30: Unicode (UTF-16 Little-Endian) 0 ≤ o# ≤ 255 ESC/Label Command Reference Guide Rev. E Page 92 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 93
Note] If 14, 15, 16, 24, or 26 is specified for Parameter a, a character code conversion table that supports the character code set is required. Use "^SE" to enable the supporting character code conversion table. [Reference] Related commands: ^SE ESC/Label Command Reference Guide Rev. E Page 93 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 94
[Note] The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage example] An example of . ^JUS 2. Saves the setting to non-volatile memory. ^XZ ESC/Label Command Reference Guide Rev. E Page 94 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 95
The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage example] for control commands and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^CDa 1. Sets as the - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 96
printer verifies the validity of the barcode data and parameters for the input barcode command. If the validation determines that the barcode data is invalid, an error message is printed instead of a barcode. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 97
X = FNT/TTF/TTE/DAT [Function] Allots a font identifier to the font file saved to the printer. This command allots a font identifier to a font file so that the font file can be used file. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 97 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 98
Downloads the character code conversion table to the printer. Character code conversion table refers to a table code conversion table in CSV format is created by the Epson utility. [Note] Use a colon for the parameter commands: None ^SE ESC/Label Command Reference Guide Rev. E Page 98 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 99
label d = R/E/B/A format file R: Volatile memory E: Non-volatile memory B: Optional memory A: Optional memory o Label the label format to the label format file. The label is not printed for label formats file. This file is called the label format file. The label format file is saved to the - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 100
width [8 dots] data Graphic data Range d = R/E/B/A R: Volatile memory E: Non-volatile memory B: Optional memory A: Optional memory ASCII code within 8 characters x = GRF (Fixed) s > 0 w > 0 Hexadecimal character string ESC/Label Command Reference Guide Rev. E Page 100 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 101
] Downloads a monochrome bitmap graphic to the printer. The graphic is stored to the specified storage 18 o 180 y 380 O 9 Y 19 p 200 z 400 P 10 g 20 q 220 [Response] None [Reference] Related commands: ~DN, ^HG, ^XG ESC/Label Command Reference Guide Rev. E Page 101 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 102
command analysis. Graphic downloads in ASCII format (including ZB64) via "~DG", "^GF", or "~DY" are canceled. [Response] None [Reference] Related commands: ~DG, ^GF, ~DY ESC/Label Command Reference Guide Rev. E Page 102 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 103
= FNT s TrueType font data size [byte] s > 0 data TrueType font data Hexadecimal character string [Function] Downloads TrueType fonts to the printer. The TrueType fonts are saved to the storage location specified by the parameter. [Response] None [Reference] Related commands: ^A@, ^CW - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 104
within 8 characters f = A/B/P A: ASCII/ZB64 B: Binary P: PNG(ZB64) x = E/G/P/T/BGD/UCL E: TTE G: GRF P: PNG T: TTF BGD: BGD UCL: UCL t > 0 w > 0 ASCII or binary (Varies based on Parameter f) ESC/Label Command Reference Guide Rev. E Page 104 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 105
Downloads the graphic or font data to the printer. The input data of the data format l 120 v 320 L 6 V 16 m 140 w 340 M 7 W 7 n 160 x 360 N 8 X 18 o 180 y 380 O 9 Y 19 p 200 z 400 P 10 g 20 q 220 ESC/Label Command Reference Guide Rev. E Page 105 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 106
[Response] None [Reference] Related commands: ^HY ESC/Label Command Reference Guide Rev. E Page 106 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 107
0 ≤ g2 ≤ 255 Background blue 0 ≤ b2 ≤ 255 component Background opacity 0 ≤ a2 ≤ 255 Background reversal specified/canceled i2 = D/N/R D : Specified by "^FR"(field reverse)/"^LR"(label reverse) N : Reversal canceled R : Reversal specified ESC/Label Command Reference Guide Rev. E Page 107 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 108
the section of the 2.6 Designating Color and the product specification of the printer for the color setting to ensure decoding barcodes and 2-dimensional codes. [Initial supported on a PNG image. Set "Foreground opacity" and "Background opacity" in PNG image. ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 109
l. To render a backslash in the field data which sets wrapping with this command, specify a backslash twice, such as . [Response] None [Reference] Related commands: ^TB ESC/Label Command Reference Guide Rev. E Page 109 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 110
to 12 %p AM/PM AM or PM %M Min. 00 to 59 %S Sec. 00 to 59 [Response] None [Reference] Related commands: ^FD, ^FV, ^SO, ^SL ESC/Label Command Reference Guide Rev. E Page 110 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 111
field. The character string specified in data is rendered as a font or barcode set to the field. [Response] None [Reference] Related commands: ^FH, ^FS ESC/Label Command Reference Guide Rev. E Page 111 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 112
^FH ^FD_31_41^FS ^XZ 1. Sets the underbar as the hexadecimal identifier. 2. Expresses the numeral 1 as and the letter A of the alphabet as . ESC/Label Command Reference Guide Rev. E Page 112 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 113
] This does not affect rendering for symbols or barcodes that are not in PDF-417 or micro PDF-417. [Reference] Related commands: ^B7, ^BF ESC/Label Command Reference Guide Rev. E Page 113 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 114
label format for the first time, define a field that does not have data (execute this command instead of "^FD".) The printer allotted exist in a label format, the field data in advance as a label format file to print label format file. ^XA ^XFR:FORMAT.FMT^FS ^FN1^FDEPSON^FS ^XZ 3. Calls label - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 115
x ,y ,j Parameters Description Range x x coordinate of field origin on label [dot] 0 ≤ x ≤ 32000 y y coordinate of field origin on label [dot] 0 ≤ y ≤ 32000 j Specifies field origin location j TB", the specification of "^TB" is followed. ESC/Label Command Reference Guide Rev. E Page 115 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 116
the top left or top right of the field, as seen from the front of the label, is set as the field origin location. The following figure indicates the positioning of the AB C D E ABC DE ABC DE [Response] None [Reference] Related commands: ^FW, ^TB ESC/Label Command Reference Guide Rev. E Page 116 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 117
in is set based on Parameter d. The space to be added between characters is set based on Parameter s. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 117 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 118
is set to the field. When the field is rendered to a drawing canvas, the printer operates as follows. If monochrome reversal is not set, the rendered dots are black. E.g.) After rendering [Response] None [Reference] Related commands: ^LR ESC/Label Command Reference Guide Rev. E Page 118 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 119
the field is the next "^FS" or "^XZ". This command can be executed using the control code . [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 119 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 120
of field rendering 0 ≤ x ≤ 32000 origin on label [dot] y y coordinate of field rendering 0 ≤ y ≤ 32000 origin on label [dot] j Rendering origin in the field j = of the rendering origin for the field on the label is set based on Parameters x and y. The rendering origin is a relative coordinate - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 121
of the graphic If rotation has been specified based on the field orientation setting, the field is rotated centered on the field rendering origin. ESC/Label Command Reference Guide Rev. E Page 121 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 122
FIELD [When right is selected] NEW ABC FIELD DE If defining the field first in the label format, set the home position coordinates as the field rendering origin. If you omitted only Parameter [Response] None [Reference] Related commands: ^FW ESC/Label Command Reference Guide Rev. E Page 122 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 123
printed, the printer operates as follows. The printer prints the image rendered by "^FD" in the following label. The printer does not print the image rendered by this command in the following label. [Response] None [Reference] Related commands: ^MC, ^FH ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 124
the field orientation is omitted, the default field orientation set in this command is applied. The default field orientation is set based on Parameter o. ESC/Label Command Reference Guide Rev. E Page 124 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 125
field. When right is selected, the field origin is put in the right of the defined field. [Response] None [Reference] Related commands: ^FO, ^FT ESC/Label Command Reference Guide Rev. E Page 125 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 126
Up to 3,072 bytes of ASCII code, excluding characters set for the prefix [Function] Defines a character string that does not affect label format printing. The character string for data is defined as a character string that does not affect printing. [Response] None [Reference] Related - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 127
length of the rectangle's short side (the smaller value between h and w) is S, then an arc where R = r/8 × S/2 is rendered. w h t R R R R [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 127 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 128
specified based on Parameter d. The thickness and color of the circle's outline are specified based on Parameters t and c. d t [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 128 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 129
the diagonal line are specified based on Parameters t and c. The diagonal line's orientation is specified based on Parameter d. w w t h t h [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 129 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 130
based on Parameters w and h. The thickness and color of the ellipse's outline are specified based on Parameters t and c. w t h [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 130 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 131
depending on the model) 0 ≤ s ≤ 9999999 (Varies depending on the model) 0 ≤ w ≤ 9999999 (Varies depending on the model) Hexadecimal character string or binary (Specified in Parameter f) ESC/Label Command Reference Guide Rev. E Page 131 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 132
u 300 K 5 U 15 l 120 v 320 L 6 V 16 m 140 w 340 M 7 W 7 n 160 x 360 N 8 X 18 o 180 y 380 O 9 Y 19 p 200 z 400 P 10 g 20 q 220 [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 132 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 133
mark's standard height for Parameter h. Set a multiple of the symbol mark's standard width for Parameter w. [Response] None [Reference] Related commands: ^FW, ^CF, ^FD, ^FV ESC/Label Command Reference Guide Rev. E Page 133 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 134
character string. If an undefined identifier is specified for Parameter a or Parameter b, is set to "#NA" and sent to the host. If Parameter a or Parameter b is omitted, the printer does not respond. ESC/Label Command Reference Guide Rev. E Page 134 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 135
response data from the printer: ->^S(CAA,A,#NA The printer operation mode specified with "AA,A" is not defined. [Reference] Related function specifications: 2.5 Getting and Setting Printer Information Related commands: ^S(C ESC/Label Command Reference Guide Rev. E Page 135 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 136
Eabc^XZ Request to send echo string "abc". Example of response data from the printer: ->^H(Eabc Echo back with echo string as "abc" data from the printer: ->^H(E Echo back without echo string in response. ESC/Label Command Reference Guide Rev. E Page 136 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 137
character string. If an undefined identifier is specified for Parameter a or Parameter b, is set to "#NA" and sent to the host. If Parameter a or Parameter b is omitted, the printer does not respond. ESC/Label Command Reference Guide Rev. E Page 137 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 138
of response data from the printer: ->^S(IAA,A,#NA The printer information specified with "AA,A" is not defined. [Reference] Related function specifications: 2.5 Getting and Setting Printer Information Related commands: None ESC/Label Command Reference Guide Rev. E Page 138 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 139
a is not 2 characters, or if it is not an ASCII character string. If an undefined identifier is specified for Parameter a, is set to "#NA" and sent to the host. If Parameter a is omitted, the printer does not respond. ESC/Label Command Reference Guide Rev. E Page 139 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 140
remaining yellow ink> The remaining ink status for all colors can be received as . A 2-character ASCII string is set as the identifier for the remaining ink status. No Maintenance box Maintenance box installed ESC/Label Command Reference Guide Rev. E Page 140 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 141
warning NSU Nozzle check disabled WSC Service call warning WNC Nozzle clog warning printer: ->AA,#NA The printer status specified with "AA" is not defined. [Reference] Related function specifications: None Related commands: None ESC/Label Command Reference Guide - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 142
character string. If an undefined identifier is specified for Parameter a or Parameter b, is set to "#NA" and sent to the host. If Parameter a or Parameter b is omitted, the printer does not respond. ESC/Label Command Reference Guide Rev. E Page 142 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 143
data from the printer: ->^S(IAA,A,#NA The printer operation status specified with "AA,A" is not defined. [Reference] Related function specifications: 2.5 Getting and Setting Printer Information Related commands: None ESC/Label Command Reference Guide Rev. E Page 143 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 144
x Extension x = GRF/PNG/TTE/TTF/OTF/BGD/FNT [Function] Sends the content of the file designated by parameter d:o.x to the host. [Initial value] None ESC/Label Command Reference Guide Rev. E Page 144 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 145
have meaning. data Binary data that shows content of Binary the sending file. The printer does not respond if the file designated by parameter d:o.x does not exist. Please refer to ESC/Label Command List for "~DY"(download objects) command. ESC/Label Command Reference Guide Rev. E Page 145 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 146
LF> refers to the file name specified by Parameter o in this command. refers to data which expresses the file specified by Parameter o in a command character string. [Reference] Related commands: ^DF ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 147
data in the #th line of the raster graphic stored in graphic> (# is any value from 1 to N) the specified file [Reference] Related commands: ^DG ESC/Label Command Reference Guide Rev. E Page 147 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 148
label configuration to the host. [Response] Responds with multiple pieces of information in a list format. If the total number of pieces of information is N, a response like the following one is sent. [Printer to information unique to the printer and the printer configuration, and the type of - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 149
] of the volatile memory device equipped in the printer. refers to the name of the option equipped in the printer. This is included in the transmitted information when an option is equipped. [Reference] Related commands: ^HM ESC/Label Command Reference Guide Rev. E Page 149 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 150
refers to the maximum capacity of the volatile memory [Kbyte] that the printer user can use. refers to the capacity of the volatile memory [Kbyte] that the printer user can currently use. [Reference] Related commands: ^HI ESC/Label Command Reference Guide Rev. E Page 150 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 151
defined 0: Label format not being defined iii Reserved Fixed at 000 j Reserved Fixed at 0 k Reserved Fixed at 0 l Reserved Fixed at 0 mmm Reserved Fixed at 000 n Reserved Fixed at 0 o Cover open 1: Cover open2 0: Cover not open ESC/Label Command Reference Guide Rev. E Page - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 152
Rewind 1: Peel label removal waiting state. 0: It is not a label removal waiting state. uuuuuuuu Number of labels remaining in label format currently being processed 00000000 to 99999999 v Reserved Fixed at 1 www Number of graphics in the printer Label Command Reference Guide Rev. E Page 152 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 153
] on the drive specified by Parameter d. refers to the type of the memory device, such as RAM or onboard flash. ESC/Label Command Reference Guide Rev. E Page 153 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 154
[Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 154 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 155
the graphic file stored in the specified file [Reference] CRC calculated for the above expressed in 4-digit hexadecimal. Related commands: ^DY ESC/Label Command Reference Guide Rev. E Page 155 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 156
o and x. An asterisk indicates an arbitrary character string. Multiple files can be specified at once using wild cards. [Response] None [Reference] Related commands: ^JB ESC/Label Command Reference Guide Rev. E Page 156 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 157
B: Optional memory A: Optional memory o File name ASCII code within 8 characters x Extension x = GRF/PNG [Function] Renders the graphic file to the label format. The graphic file specified by storage drive, file name, and extension is rendered. The graphic file is always rendered with - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 158
file to the field. The graphic file specified by storage drive, file name, and extension is rendered. [Response] None [Reference] Related commands: ~DG , ~DY ESC/Label Command Reference Guide Rev. E Page 158 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 159
and file name for the drawing canvas are specified based on Parameters d, o, and x. Whether or not to print the label after saving the drawing canvas is specified based on Parameter p. [Response] None [Reference] Related commands: ^IL ESC/Label Command Reference Guide Rev. E Page 159 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 160
~J(C [Name] Execute cleaning [Format] ~J(C [Parameter] None [Function] Executes cleaning. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 160 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 161
operation Function execute parameter Description Execute cleaning [Response] None [Reference] Related commands: ~JC Range a = 2-character ASCII string b = 1-character ASCII string b=A/H A: Auto H: Power Cleaning Range ESC/Label Command Reference Guide Rev. E Page 161 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 162
~JA [Parameter] None [Function] Deletes all label formats in the printer. Label formats that have not been closed with "^XZ" are control command is executed. If a label format to be deleted is currently printing, print is stopped once one label finishes printing. The drawing canvas is - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 163
] ^JB d Parameters Description d Target drive [Function] Initializes the target drive. [Response] None [Reference] Related commands: ^ID Range d = E/B/A E: Non-volatile memory B: Optional memory A: Optional memory ESC/Label Command Reference Guide Rev. E Page 163 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 164
during media calibration. Adjustment of media sensor threshold values, etc. Detection of label length Label feeding to home position Along with the above, paper for one label or more is fed. [Response] None [Reference] Related commands: ^MN ESC/Label Command Reference Guide Rev. E Page 164 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 165
magnification for the label format. coordinate that specify the position in the label format are doubled. This can also be label format. The ^JUS command is required to save settings to the non-volatile memory of the printer label format and saves settings to the non-volatile memory of the printer - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 166
before the next ^XA is read and discarded, and only the control command is executed. If a label format to be deleted is currently printing, print is stopped once one label finishes printing. [Response] None [Reference] Related commands: JX, ~JA ESC/Label Command Reference Guide Rev. E Page 166 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 167
~JR [Name] Soft reset [Format] ~JR [Parameter] None [Function] Resets the printer. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 167 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 168
the specified percentage after printing and cutting. Only multiples of 10 can be specified if specifying a numerical value. This command can be used with both printers with or without a cutter. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 168 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 169
the current printer configuration is saved to non-volatile memory. The next time the power is turned on, the printer configuration will be initialized to the latest configuration saved to non-volatile memory. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 170
to a label format which was started by ^XA but was not ended with ^XZ. The format command from this command to directly before the next ^XA is read and discarded, and only the control command is executed. [Response] None [Reference] Related commands: ~JP, ~JA ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 171
labels which were canceled due to an error will be reprinted once the printer of the printer unit. labels for which printing was canceled due to an error and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^JZY 1. Sets the reprinting for labels - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 172
JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage information on the LCD and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^KL1 1. Sets the language used to - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 173
printable area refers to the area of the media used in printing, excluding the gap between labels and areas where printing cannot be performed due to the physical limitations of the printer. The following figure indicates positioning of the logical origin, the home position, and the field origin - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 174
label reverse print e = Y/N Y: Set N: Cancel [Function] Sets reversed printing for the whole label. Reversed printing is set for the label e, the color values for all dots on the drawing canvas in the label format are reversed. Reversal is also executed for color printing. [Response - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 175
's left edge and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^LS1000 1. Sets the amount to adjust the position of the label's left edge to 1000 [dot]. ^JUS 2. Saves the setting to non-volatile memory. ^XZ ESC/Label Command Reference Guide Rev. E Page 175 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 176
edge, and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^LT1000 1. Sets the amount to adjust the position of the label's leading edge to 1000 [dot]. ^JUS 2. Saves the setting to non-volatile memory. ^XZ ESC/Label Command Reference Guide Rev. E Page 176 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 177
of the maintained label format. Print images for fields rendered based on "^FV", "^SN", "^SF", or "^FC" are deleted from the drawing canvas after printing, regardless of the specification for this command. [Response] None [Reference] Related commands: ^FV ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 178
o or s, label feeding to home Label feeding to home position Supported operations vary depending on the model. [Response] None [Reference] Related commands: None [Note] The ^JUS command is required to save settings to the non-volatile memory of the printer of the printer unit is - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 179
The print mode determines the printer operations from the printing of one label to the printing of the next label. Print mode Operation after label printing Operation by the next label command No cutting Feeds the label to the manual cut position. Backfeeds the next label to the home position - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 180
method. If N is specified for Parameter s, "does not detect label edge" is set for the label edge detection method. Printer control, such as label feeding to home position, is performed based on the label length set in the printer. If Y or W is specified for Parameter s, "gap detection" is - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 181
command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [ enables/disables the buttons and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^MPW 1. Sets the pause button to - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 182
of measurement [Format] ^MU u ,i ,o Parameters Description Range u Basic printer unit system u = D/I/M D: Dots I: Inches M: Millimeters i Rendering first field in the label format. The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 183
the unit for specifying the rendering position and size and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^MUD,150,300 1. Sets the basic printer unit system to , the rendering resolution to , and the print resolution to . ^JUS 2. Saves the - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 184
Range a Function identifier for a = 2-character ASCII string manual operation execution BZ: Execute buzzer CT: Execute cut [Function] Execute operation specified by function identifier. BZ: Executes buzzer after printing for the current label format is completed. CT: Executes cut after - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 185
^PH [Name] Feed to home position [Format] ^PH [Parameter] None [Function] Feeds paper for 1 label. After printing for the current label format is completed, paper for one label is fed. [Response] None [Reference] Related commands: ~PH ESC/Label Command Reference Guide Rev. E Page 185 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 186
~PH [Name] Feed to home position [Format] ~PH [Parameter] None [Function] Feeds paper for 1 label. If a label is currently being printed, paper for one label is fed after printing is completed. [Response] None [Reference] Related commands: ^PH ESC/Label Command Reference Guide Rev. E Page 186 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 187
e = Y/N print Y: Set N: Cancel [Function] Set/cancel mirror image print If mirror image printing is specified based on Parameter e, the left and right sides of the label are reversed. [Response] None [Note] If using this command, use it before defining the first field in the - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 188
^PO [Name] Set 180° rotation print [Format] ^PO e Parameters e Description Set/cancel 180° rotation printing e = N/I N: Cancel I: Set Range ESC/Label Command Reference Guide Rev. E Page 188 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 189
, and the white circle indicates the field origin.) [180° rotation canceled] Label discharge direction Gap between labels Gap between labels x y X axis X Y Y axis ABC Printable area Gap between labels Gap between labels [Response] None ESC/Label Command Reference Guide Rev. E Page 189 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 190
[Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 190 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 191
[Name] Paused [Format] ^PP [Parameter] None [Function] Transitions the printer to the paused status. The printer is paused after it completes printing label formats that include this command. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 191 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 192
[Parameter] None [Function] Transitions the printer to the paused status. If the printer is printing a label, it stops printing once that label is printed, then transitions to the paused status. [Response] None [Reference] Related commands: ^PP ESC/Label Command Reference Guide Rev. E Page 192 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 193
suppression is canceled, the printer transitions to the paused status each time it performs a cut. If pause suppression is specified, the printer does not transition to the paused status. [Response] None [Reference] Related commands: ^SN, ^SF ESC/Label Command Reference Guide Rev. E Page 193 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 194
~PS [Name] Cancel pause [Format] ~PS [Parameter] None [Function] Cancels the printer's paused status. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 194 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 195
be reset c = 1/2 1: Counter 1 2: Counter 2 [Function] Resets a counter. The counter to be reset is specified based on Parameter c. [Response] None [Reference] Related commands: None Range ESC/Label Command Reference Guide Rev. E Page 195 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 196
Printer Operation Modes. [Function] Sets the printer operation mode. Sets Parameter c to the printer operation mode specified in Parameter a, b. A printer Setting Printer Information Related memory of the printer unit. Please non-volatile memory of the printer unit is shown below. ^XA - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 197
conversion table. The printer uses a valid character code conversion table to convert received character code to Unicode. The printer renders the converted characters which support Unicode. [Response] None [Reference] Related commands: ^CI, ^DE ESC/Label Command Reference Guide Rev. E Page - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 198
Parameter i. After printing the serialized label print quantity specified for Parameter c in "^PQ", the printer advances the sequence by the increment Set increment 1 to the character string [123]. 2. Set 10 labels for to the total print quantity. ESC/Label Command Reference Guide Rev. E Page 198 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 199
If S is specified for Parameter t, the date and time rendered to the label is fixed as the label format start time based on "^XA". The date and time is rendered to the first field in the label format. [Reference] Related commands: ^KL ESC/Label Command Reference Guide Rev. E Page 199 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 200
After printing the serialized label print quantity specified for Parameter c in "^PQ", the printer advances the serialization data by 2. Set 10 labels for to the total print quantity. 3. Prints 10 labels, increasing the value by 1 each time: 123, 124, ... ESC/Label Command Reference Guide Rev. E - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 201
specified based on Parameter t. The difference from the primary clock is set based on Parameters mo, d, y, h, mi, and s. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 201 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 202
. Depending on the model, you may not be able to specify a year before the product went on sale. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 202 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 203
JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage the tear-off position and saves settings to the non-volatile memory of the printer unit is shown below. ~TA020 1. Sets the value to adjust the tear - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 204
clockwise) w Block width [dot] 1 ≤ w ≤ 9999 h Block height 1 ≤ h ≤ Label length [Function] Sets wrap for rendering character strings in the field. Characters strings in the o. [Response] None [Reference] Related commands: ^A, ^FB ESC/Label Command Reference Guide Rev. E Page 204 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 205
o2. An asterisk indicates an arbitrary character string. Multiple files can be specified at once using wild cards. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 205 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 206
and if printing is executed normally PF: Paper feed regulation pattern Pattern printing to correct gap of print with form slid Supported type of printing vary depending on the model. [Initial value] None [Response] None [Reference] Related function specifications: None Related commands - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 207
~WC [Name] Print status sheet [Format] ~WC [Parameter] None [Function] Prints multiple pieces of information in a list format. [Response] None [Reference] Related commands: ^HH ESC/Label Command Reference Guide Rev. E Page 207 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 208
file specified by storage drive, file name, and extension is printed as the directory label. The file name, extension, file size, and optional information are printed as file character string. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 208 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 209
^XA [Name] Start label format [Format] ^XA [Parameter] None [Function] Starts the label format. This command can be executed using the control code . [Response] None [Reference] Related commands: ^XZ ESC/Label Command Reference Guide Rev. E Page 209 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 210
^XB [Name] Suppress backfeed [Format] ^XB [Parameter] None [Function] Suppresses backfeed when printing is completed. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. E Page 210 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 211
by the storage drive, file name, and extension is loaded. A label format file refers a file which saved a command string. You can reuse commands by loading a pre-made label format file. [Response] None [Reference] Related commands: ^DF ESC/Label Command Reference Guide Rev. E Page 211 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 212
and my. The x axis is multiplied by mx, and the y axis is multiplied by my during rendering. [Response] None [Reference] Related commands: ~DG, ~DY ESC/Label Command Reference Guide Rev. E Page 212 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 213
^XZ [Name] End format [Format] ^XZ [Parameter] None [Function] Ends the format. The format started by "^XA" is ended. This command can be executed using the control code . [Response] None [Reference] Related commands: ^XA ESC/Label Command Reference Guide Rev. E Page 213 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 214
checked at the column of "Model dependence for function support". The factory-set initial values for each setting in printer operation mode depend on the printer model. Refer to the attached Command List also for details regarding model dependence. ESC/Label Command Reference Guide Rev. E Page 214 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 215
table Table A-1 List of Printer Operation Modes Description of object Model dependence for definition range Model dependence for function support Corresponding ZPL II command None None A Logical label left edge position -9999 to 9999 adjustment [dot] ([mm])¹ M = Physical label left - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 216
CL: Continuous label IR/ER IR: Internal roll ER: External feed RP/FP RP: Roll paper FP: Fanfold paper Model dependence for definition range Model dependence for function support Corresponding ZPL II command ^LT ^MN None None None ESC/Label Command Reference Guide Rev - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 217
coating type Definition range Model dependence for definition range Model dependence for function support Corresponding ZPL II command P1/P2/P3/M1/M2/M3/S1/S2/S3 ] ([mm])¹ M = Paper feed adjustment [dot] -99 to 99 ~TA None None ESC/Label Command Reference Guide Rev. E Page 217 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 218
(width) E/D detection E: Enabled D: Disabled Model dependence for definition range Model dependence for function support Corresponding ZPL II command None ^JM ^MU ^MU None None None None None None ESC/Label Command Reference Guide Rev. E Page 218 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 219
D: Disabled 0 to 9999 Model dependence for definition range Model dependence for function support Corresponding ZPL II command None None L = Left margin [dot F: Feed L: Measure media length N: No feed S: Short calibration ^MF ESC/Label Command Reference Guide Rev. E Page 219 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 220
Manual paper suction strength 1 to 10 Model dependence for definition range Model dependence for function support Manual peeling and application R: Rewind A: Automatic peeling and application C: Cutting performed D/F/L/U/K: Reserved ~JS None ^MM ESC/Label Command Reference Guide - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 221
. dot 2: Max. dot U = Basic printer unit system D/I/M D: Dots I: Inches M: manual application [dot] Model dependence for definition range Model dependence for function support Corresponding ZPL II command None None ^MU None None None ESC/Label Command Reference Guide - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 222
(0.1 sec units) Model dependence for definition range Model dependence for function support Corresponding ZPL II command None None MT Auto E: Automatic execution None None None None None None None ESC/Label Command Reference Guide Rev. E Page 222 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 223
for definition range Model dependence for function support Corresponding ZPL II command None None None None None None None None None None None None None None None ESC/Label Command Reference Guide Rev. E Page 223 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 224
None E: Each label L: Last label E/D E: Enabled D: Disabled Model dependence for definition range Model dependence for function support Corresponding ZPL II E: Enabled D: Disabled E/D E: Enabled D: Disabled None ^MP ^MP None ESC/Label Command Reference Guide Rev. E Page 224 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 225
E/D E: Enabled D: Disabled Model dependence for definition range Model dependence for function support Corresponding ZPL II command ^MP P = Enable/disable pause button E/D E: : Polish 100: Greek 101: Turkish None None ^KL ESC/Label Command Reference Guide Rev. E Page 225 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 226
of object identifier Definition range P = Set/cancel error reprinting function Y/N Y: Set N: Cancel Model dependence for definition range Model dependence for function support Corresponding ZPL II command ^JZ ¹ The unit of the setting value can be selected from dot/mm/inch by ^S(CMP,U or - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 227
range". The printer operation status whose function may not be supported depending on the model is checked at the column of "Model dependence for function support". Refer to the attached Command List also for details regarding model dependence. ESC/Label Command Reference Guide Rev. E Page - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 228
support Corresponding ZPL II command None None CN Non-resettable counter C = Non-resettable counter (Centimeter) Figure [cm] ^HH I = Non-resettable counter (Inch) Figure [inch] ^HH L = Non-resettable counter (Printed label ^HW ^HW ^HW ESC/Label Command Reference Guide Rev. E Page 228 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 229
cover open error CF: Front cover open error CR: Release lever open error CG: Guide unit open error SC: Sensor calibration error IC: Cleaning not available due to low Model dependence for function support Corresponding ZPL II command ^HS None ESC/Label Command Reference Guide Rev. E Page 229 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 230
of object identifier V = Media length H = Media width S = Printer operation status PA Printing stopped status C = Cover open status O = for function support Corresponding ZPL II command None None None None None T/F ~HS T: Paper out F: Not Paper out ESC/Label Command Reference Guide Rev. - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 231
S = Pause status F = Buffer full status Definition range T/F T: Paused F: Not paused T/F T: Buffer full F: Not Buffer full Model dependence for definition range Model dependence for function support Corresponding ZPL II command ~HS ~HS ESC/Label Command Reference Guide Rev. E Page 231 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 232
ZPL II command MF Firmware C = Printer built in ASCII, within ✓ version font version 8 characters None V = Firmware version ASCII, within 8 characters ^HH/~HI/^HZ MP individual S = Serial number ASCII, 10 information characters None ESC/Label Command Reference Guide Rev. E Page 232 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 233
Revision A B C D E Enactment Partial correction Partial correction Partial correction Partial correction REVISION SHEET (Summary) Summary ESC/Label Command Reference Guide Rev. E Page 233 - Epson ColorWorks C7500 | ESC/label Command Reference Guide - Page 234
ranges, and revised model dependence information Deleted the model dependent printer information. Added the ^XB command Added language support for the ^KL command Added the ^S(C function, reviewed definition ranges, and revised model dependence information Changed the ^BX command definition
Command Reference Guide
M00097704
Rev. E